VFL 6.5" Car Subwoofer 300 Watts RMS Dual Voice Coil 4 Ohm
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
Subwoofer Wiring Diagram
Select your configuration to view possible wiring combinations.
Loading wiring diagrams…
Diagrams are on our wiring diagram page.
- 300W RMS / 600W max — real bass from a 6.5" driver
- Dual 4Ω voice coil — flexible wiring to your amp
- 2" high-temp voice coil — reliable power handling for its size
- 70 oz strontium magnet — tight, responsive control
- VFL-6544 — Kevlar-composite cone on a die-cast basket
American Bass VFL 6.5" Car Subwoofer — 300W RMS Dual Voice Coil (VFL-6544)
This Listing Includes:
- (1) American Bass VFL 6.5" Subwoofer
The VFL 6.5" proves you don’t need a big enclosure to add real low end. Rated at 300W RMS and 600W max, the VFL 6.5" runs a 2" high-temp voice coil and a 70 oz strontium motor on a die-cast basket, making it ideal for door pods, tight trunks, and compact sealed builds. Its dual 4Ω voice coil keeps wiring flexible.
Features
- Kevlar fiber plus non-press paper composite cone for stiff, accurate output
- 2" high-temperature voice coil for reliable power handling
- Red-stitched hi-roll ribbed foam surround for clean excursion (8mm Xmax)
- Heavy-duty die-cast basket with black powder finish
- 70 oz double-stacked strontium magnet for responsive control
Specifications
| RMS Power | 300W |
| Max Power | 600W |
| Impedance | Dual 4Ω (VFL-6544) |
| Sensitivity | 80.9 dB |
| Voice Coil | 2" high-temp |
| Magnet | 70 oz double-stacked strontium |
| Cone | Kevlar fiber + non-press paper composite |
| Surround | Red-stitched hi-roll ribbed foam |
| Basket | Heavy-duty die-cast, black powder finish |
| Mounting Depth | 4.06" |
| Cutout Diameter | 5.98" |
| Xmax | 8.0 mm |
| Fs | 54.3 Hz |
| Qts | 0.58 |
| Qes | 0.656 |
| Qms | 4.73 |
| Vas | 2.552 L |
| BL | 8.41 |
| Mms | 70.27 g |
| Sd | 13.27 cm² |
