VFL 10" Car Subwoofer 800 Watts RMS Dual Voice Coil 4 Ohm
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
Subwoofer Wiring Diagram
Select your configuration to view possible wiring combinations.
Loading wiring diagrams…
Diagrams are on our wiring diagram page.
- 800W RMS / 1600W max — strong, controlled output
- Dual 4Ω voice coil — flexible wiring to your amp
- 2.5" high-temp voice coil — reliable power handling
- 150 oz strontium magnet — tight, punchy control
- VFL-1044 — Kevlar-composite cone on a die-cast basket
American Bass VFL 10" Car Subwoofer — 800W RMS Dual Voice Coil (VFL-1044)
This Listing Includes:
- (1) American Bass VFL 10" Subwoofer
The VFL 10" delivers American Bass VFL-series punch in a manageable 10" footprint. Rated at 800W RMS and 1600W max, the VFL 10" pairs a 2.5" high-temp voice coil with a 150 oz strontium motor on a die-cast basket for tight, controlled bass. Its dual 4Ω voice coil gives you wiring options to match your amplifier.
Features
- Kevlar fiber plus non-press paper composite cone for stiff, accurate output
- 2.5" high-temperature voice coil for reliable power handling
- Red-stitched hi-roll ribbed foam surround for long, linear travel (14mm Xmax)
- Heavy-duty die-cast basket with black powder finish
- 150 oz double-stacked strontium magnet for tight control
Specifications
| RMS Power | 800W |
| Max Power | 1600W |
| Impedance | Dual 4Ω (VFL-1044) |
| Sensitivity | 83.3 dB |
| Voice Coil | 2.5" high-temp |
| Magnet | 150 oz double-stacked strontium |
| Cone | Kevlar fiber + non-press paper composite |
| Surround | Red-stitched hi-roll ribbed foam |
| Basket | Heavy-duty die-cast, black powder finish |
| Mounting Depth | 6.46" |
| Cutout Diameter | 9.13" |
| Xmax | 14.0 mm |
| Fs | 39.0 Hz |
| Qts | 0.45 |
| Qes | 0.501 |
| Qms | 4.22 |
| Vas | 11.6 L |
| BL | 12.94 |
| Mms | 201.19 g |
| Sd | 31.42 cm² |
