Sundown Audio ZV7 12" Dual Bundle (Baltic Birch)
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
How this package ships
- Two separate deliveries. Your subwoofers ship from JS Ultimate Sounds and usually arrive first.
- Separate tracking numbers. You will get one for each delivery, so a tracking link showing only part of your order is normal.
- The enclosure is built to order by Basshead Supply and ships direct from them in about 2 to 3 weeks.
- The subwoofers are not pre-installed. You mount them in the enclosure once both have arrived.
- The enclosure arrives finished in a gray stain, ready to install.
What is included
- (2) Sundown Audio Z-Series ZV7 12" Subwoofers
- (1) Sundown Audio ZV7 12" Dual Ported Subwoofer Enclosure, Baltic Birch
Priced 10% below buying the subwoofers and enclosure separately.
Choose your impedance below.
Sundown Audio Z-Series ZV7 12" Subwoofer
- Voice Coil — 3.3″ diameter, 4-layer round-wire aluminum on a thick aluminum former, 95mm winding length
- Motor — Quad-stacked 265mm (10.43″) structure, 100mm (3.94″) magnet stack
- Excursion — 42mm one-way linear by 70% BL; over 4″ p-p before mechanical bottom
- Impedance — Dual 1-ohm or dual 2-ohm
This Listing Includes: (2) Sundown Audio Z-Series ZV7 12″ Subwoofers
The Z v.7 is the third step in Sundown’s 2025 ultra-high-excursion lineup after the M and X v.4 series, built on the custom-tooled, patented “mega-platform” frame. It pairs that frame with a quad-stacked 265mm (10.43″) motor and a 100mm (3.94″) magnet stack — the largest motor ever used on a Z series sub — driving a 3.3″ 4-layer round-wire aluminum voice coil with a 95mm winding length. A patent-pending airflow-directing pole cap, six pole-OD channels, sixteen gap vents, and a cross-drilled top plate keep the coil cool, while a 9mm magnet-ID Faraday ring and pole-extension inductance sleeve deliver highly linear inductance. The result is 42mm of one-way linear excursion by 70% BL with an extremely uniform curve, designed for the lowest bass extension possible in a small ported enclosure with very low distortion.
Features
- Patented Sundown “mega-platform” custom-tooled frame
- Quad-stacked 265mm (10.43″) motor with 100mm (3.94″) magnet stack
- 3.3″ 4-layer round-wire aluminum voice coil, 95mm winding length
- Patent-pending pole cap, six pole-OD channels, sixteen gap vents, cross-drilled top plate
- 9mm magnet-ID Faraday ring with pole-extension inductance sleeve
Specifications
| Impedance | Dual 1-ohm or Dual 2-ohm |
| Voice Coil | 3.3″ diameter, 4-layer round-wire aluminum, 95mm winding |
| Motor | Quad-stacked 265mm (10.43″) |
| Magnet Stack Height | 100mm (3.94″) |
| Linear Excursion | 42mm one-way by 70% BL |
| Faraday Ring | 9mm magnet-ID |
Sundown Audio ZV7 12" Dual Ported Subwoofer Enclosure
- Net Volume - 5.0 cu ft
- Tuning - 31.0 Hz
- Port Area - 72.8 sq in
- Sub Cutout - 11.09"
- Construction - 1" (24mm) plywood construction
This Listing Includes: (1) Basshead Supply ported enclosure for the Sundown Audio ZV7 12" subwoofer
This enclosure is custom built specifically for the Sundown Audio ZV7 12" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.
Features
- 1" (24mm) plywood construction
- 17 ply birch veneer construction
- Gray stained finish
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 5.0 cu ft |
| Tuning | 31.0 Hz |
| Port Area | 72.8 sq in |
| Port Dimensions | 16.0" x 4.55" |
| Sub Cutout | 11.09" |
| Construction | 1" (24mm) plywood construction |
| Finish | Gray stained finish |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions (HxWxD) | 18.0" x 39.375" x 21.875" |
