Sundown Audio Z 8" Dual Bundle (MDF)
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
How this package ships
- Two separate deliveries. Your subwoofers ship from JS Ultimate Sounds and usually arrive first.
- Separate tracking numbers. You will get one for each delivery, so a tracking link showing only part of your order is normal.
- The enclosure is built to order by Basshead Supply and ships direct from them in about 2 to 3 weeks.
- The subwoofers are not pre-installed. You mount them in the enclosure once both have arrived.
- The enclosure arrives bare and sanded, ready for you to finish however you like.
What is included
- (2) Sundown Audio Z-Series Z8" 4000W Subwoofer Z-8s
- (1) Sundown Audio Z MDF 8" Dual Ported Subwoofer Enclosure
Priced 10% below buying the subwoofers and enclosure separately.
Choose your impedance below.
Sundown Audio Z-Series Z8" 4000W Subwoofer Z-8
- Power Handling — 2,000W RMS / 4,000W Peak
- Voice Coil — Black aluminum 2.75" 4-layer round-winding
- Xmax — 30mm
- Impedance — Available in D1 and D2 (dual voice coil)
- Recommended Enclosure — 1.0 cu. ft. ported, tuned to 32Hz (sealed not recommended)
This Listing Includes: (2) Sundown Audio Z-Series Z8 8" Subwoofers
The Z8 packs elite Z Series engineering into an 8-inch frame, handling 2,000 watts RMS and 4,000 watts peak. It is built around a black aluminum 2.75" 4-layer round-winding voice coil with a 30mm Xmax for serious excursion and power handling in a compact size. Cooling comes from an optimized high-velocity pole vent, a cast-aluminum vented frame spacer ring, and a heavily vented magnetic gap, while stitched XL tinsel leads, a Mega-Roll v.2 surround, custom spider packs, and a large aluminum Faraday ring keep it durable under abuse. It is designed for ported enclosures and thrives in a 1.0 cu. ft. net box tuned to 32Hz.
Features
- 2,000W RMS / 4,000W peak power handling
- Black aluminum 2.75" 4-layer round-winding voice coil with 30mm Xmax
- Optimized high-velocity pole vent and heavily vented magnetic gap
- Mega-Roll v.2 surround with custom-tooled ultra-linear spider packs
- Large aluminum Faraday ring and stitched XL tinsel leads
Specifications
| RMS Power | 2,000W |
| Peak Power | 4,000W |
| Impedance Options | D1, D2 (Dual Voice Coil) |
| Voice Coil | 2.75" 4-Layer Round-Winding (Black Aluminum) |
| Xmax | 30mm |
| Recommended Enclosure | 1.0 cu. ft. Ported @ 32Hz |
Sundown Audio Z MDF 8" Dual Ported Subwoofer Enclosure
- Net Volume - 2.5 cu ft
- Tuning - 32.0 Hz
- Sub Cutout - 8.12"
- Construction - Dense, uniform, void-free triple refined MDF panel
This Listing Includes: (1) Basshead Supply ported enclosure for the Sundown Audio Z MDF 8" subwoofer
This enclosure is custom built specifically for the Sundown Audio Z MDF 8" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.
Features
- Dense, uniform, void-free triple refined MDF panel
- Ships bare / unfinished - sanded and ready to finish your way
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 2.5 cu ft |
| Tuning | 32.0 Hz |
| Sub Cutout | 8.12" |
| Construction | Dense, uniform, void-free triple refined MDF panel |
| Finish | Ships bare / unfinished - sanded and ready to finish your way |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions | 14.0" tall / 20.0" deep |
