Sundown Audio U v2 15 Single Bundle (Baltic Birch)
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
How this package ships
- Two separate deliveries. Your subwoofer ships from JS Ultimate Sounds and usually arrives first.
- Separate tracking numbers. You will get one for each delivery, so a tracking link showing only part of your order is normal.
- The enclosure is built to order by Basshead Supply and ships direct from them in about 2 to 3 weeks.
- The subwoofer is not pre-installed. You mount it in the enclosure once both have arrived.
- The enclosure arrives finished in a gray stain, ready to install.
What is included
- (1) Sundown Audio U-Series v.2 15" Subwoofer 2000W RMS
- (1) Sundown Audio UV2 15" Single Ported Subwoofer Enclosure, Baltic Birch
Priced 10% below buying the subwoofer and enclosure separately.
Choose your impedance below.
Sundown Audio U-Series v.2 15" Subwoofer 2000W RMS
- Power — 2000W RMS / 4000W Peak
- Voice Coil — Dual 2 or 4 ohm, 3" aluminum former
- Motor — Double-stacked 9.4" ferrite magnet with shorting rings and extended pole
- Frame — Custom heavy-duty cast aluminum with heat-dissipation ribs
- Tuning — Optimized for small ported or bandpass enclosures
This Listing Includes: (1) Sundown Audio U-Series v.2 15" Subwoofer
The U Series is the premier standard-suspension woofer in the Sundown lineup, equally at home in the competition lanes or playing your favorite music. A double-stacked 9.4-inch ferrite magnet system is coupled to a thick top plate, with shorting rings inside the magnets and on the pole cap to smooth frequency response while doubling as a heat sink and airflow guide. The custom cast aluminum frame is substantially thicker with heat-dissipation ribs, and the extended pole piece keeps the coil under perfect control under high stress. Coil temperature is managed with machined high-velocity pole channels and 16 direct air-gap vents in the back plate. Rated at 2000W RMS (4000W peak) with dual 2 or 4 ohm coils.
Features
- Aluminum 3" voice coil former for superior heat dissipation
- Double-stacked 9.4" ferrite magnet with shorting rings
- Solid pole with vent channels and aluminum shorting ring cap
- 16 direct air-gap vents and top-plate cooling channels
- Spring-loaded terminals accept up to 8-gauge wire
Specifications
| RMS Power | 2000 Watts |
| Peak Power | 4000 Watts |
| Impedance | Dual 2 ohm or Dual 4 ohm |
| Voice Coil | 3" aluminum former |
| Magnet | Double-stacked 9.4" ferrite |
| Frame | Cast aluminum |
| Recommended Enclosure | Small ported or bandpass |
Sundown Audio UV2 15" Single Ported Subwoofer Enclosure
- Net Volume - 3.75 cu ft
- Tuning - 32.0 Hz
- Port Area - 54.25 sq in
- Sub Cutout - 14.1"
- Construction - 3/4" (18mm) birch plywood construction
This Listing Includes: (1) Basshead Supply ported enclosure for the Sundown Audio UV2 15" subwoofer
This enclosure is custom built specifically for the Sundown Audio UV2 15" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.
Features
- 3/4" (18mm) birch plywood construction
- 13 ply birch veneer construction (1" Baffle 17 ply)
- Gray stained finish
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 3.75 cu ft |
| Tuning | 32.0 Hz |
| Port Area | 54.25 sq in |
| Port Dimensions | 15.5" x 3.5" |
| Sub Cutout | 14.1" |
| Construction | 3/4" (18mm) birch plywood construction |
| Finish | Gray stained finish |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions (HxWxD) | 17.0" x 31.75" x 20.0" |
