Sundown Audio U v2 10 Dual Bundle
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 in the contiguous US. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
Bundle Includes: Sundown Audio U-Series v.2 10" Subwoofer 2000W RMS + Sundown Audio UV2 MDF 10" Dual Ported Subwoofer Enclosure
Priced at 10% off the combined retail price of the subwoofer and enclosure bought separately. Select your impedance below.
Sundown Audio U-Series v.2 10" Subwoofer 2000W RMS
- Power Handling — 2000 Watts RMS / 4000 Watts Peak
- Impedance — Dual 2 or Dual 4 ohm voice coils
- Voice Coil — Aluminum 3" former, high-temperature copper coil
- Motor — Double-stacked 9.4" ferrite, extended pole, aluminum shorting ring
- Cooling — 16 direct air-gap vents, pole channels
This Listing Includes: (1) Sundown Audio U-Series v.2 10" Subwoofer
The U Series is Sundown's premier standard-suspension woofer, and the v.2 10" handles 2000 watts RMS / 4000 watts peak. It is driven by a double-stacked 9.4-inch ferrite motor coupled to a thick top plate, with shorting rings inside the magnets and on the pole cap and an extended pole piece to keep the coil under control under high stress. Coil temperature is managed by a high-velocity solid pole with machined channels and 16 direct air-gap vents in the back plate. The aluminum 3" former and high-temperature copper coil sit in a custom, substantially thicker cast-aluminum frame with heat dissipation ribs, optimized for small ported enclosures. In stock and shipping free from JS Ultimate Sounds — your authorized Sundown Audio dealer.
Features
- Aluminum 3" voice coil former for superior heat dissipation
- Double-stacked 9.4" ferrite motor with shorting rings and extended pole
- 16 direct air-gap vents and rear gap-venting top-plate cooling channels
- Heavy-duty cast basket with heat dissipation ribs
- Spring-loaded terminals accept up to 8-gauge wire
Specifications
| Power Handling (RMS) | 2000 Watts |
| Power Handling (Peak) | 4000 Watts |
| Impedance Options | Dual 2 ohm (D2) / Dual 4 ohm (D4) |
| Voice Coil | Aluminum 3" former, high-temperature copper |
Sundown Audio UV2 MDF 10" Dual Ported Subwoofer Enclosure
- Net Volume - 2.0 cu ft
- Tuning - 34.0 Hz
- Port Area - 28.75 sq in
- Sub Cutout - 9.75"
- Construction - Dense, uniform, void-free triple refined MDF panel
This Listing Includes: (1) Basshead Supply ported enclosure for the Sundown Audio UV2 MDF 10" subwoofer
This enclosure is custom built specifically for the Sundown Audio UV2 MDF 10" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Made to order (2-3 week lead time) and shipping from JS Ultimate Sounds, your Basshead Supply dealer.
Features
- Dense, uniform, void-free triple refined MDF panel
- Ships bare / unfinished - sanded and ready to finish your way
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 2.0 cu ft |
| Tuning | 34.0 Hz |
| Port Area | 28.75 sq in |
| Port Dimensions | 11.5" x 2.5" |
| Sub Cutout | 9.75" |
| Construction | Dense, uniform, void-free triple refined MDF panel |
| Finish | Ships bare / unfinished - sanded and ready to finish your way |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions (HxWxD) | 13.0" x 27.875" x 18.25" |
