Sundown Audio SAC 12" Single Bundle
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
%20Sundown%20Audio%20SA-Classic%2012%22%20Subwoofer%201000W%20RMS%20+%20(1)%20Sundown%20Audio%20SAC%20MDF%2012%22%20Single%20Ported%20Subwoofer%20EnclosurePriced%20at%2010%25%20off%20the%20combined%20retail%20price%20of%20the%20subwoofer%20a...
){kind=link}
Bundle Includes: (1) Sundown Audio SA-Classic 12" Subwoofer 1000W RMS + (1) Sundown Audio SAC MDF 12" Single Ported Subwoofer Enclosure
Priced at 10% off the combined retail price of the subwoofer and enclosure bought separately. Select your impedance below.
Sundown Audio SA-Classic 12" Subwoofer 1000W RMS
- Power — 1000W RMS / 2000W Peak
- Voice Coil — Dual 2 or 4 ohm, custom 2.5"
- Motor — Large aluminum faraday ring, low-distortion construction
- Frame — High-strength cast aluminum
- Tuning — Optimized for small ported, sealed, and band-pass enclosures
This Listing Includes: (1) Sundown Audio SA-Classic 12" Subwoofer
The SA Classic is a stunning combination of value, power handling, and deep excursion. It pairs a cast aluminum frame with a bulletproof custom 2.5-inch voice coil, a robust double-layered Nomex spider, and an SPL competition-grade paper cone. A large aluminum faraday ring keeps acoustic response smooth, and the low-distortion motor handles 1000W RMS (2000W peak) across dual 2 or 4 ohm coils. Its flexible design works well in small ported, sealed, and band-pass enclosures alike.
Features
- Custom 2.5" voice coil with SPL competition-grade paper cone
- Large aluminum faraday ring for smooth acoustic response
- Double-layered Nomex spider
- High-strength cast aluminum frame
- Spring-loaded terminals with stitched-on XL tinsel leads
Specifications
| RMS Power | 1000 Watts |
| Peak Power | 2000 Watts |
| Impedance | Dual 2 ohm or Dual 4 ohm |
| Voice Coil | 2.5" |
| Frame | Cast aluminum |
| Recommended Enclosure | Small ported, sealed, or band-pass |
Sundown Audio SAC MDF 12" Single Ported Subwoofer Enclosure
- Net Volume - 1.75 cu ft
- Tuning - 33.0 Hz
- Port Area - 25.31 sq in
- Sub Cutout - 11.125"
- Construction - Dense, uniform, void-free triple refined MDF panel
This Listing Includes: (1) Basshead Supply ported enclosure for the Sundown Audio SAC MDF 12" subwoofer
This enclosure is custom built specifically for the Sundown Audio SAC MDF 12" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Made to order (2-3 week lead time) and shipping from JS Ultimate Sounds, your Basshead Supply dealer.
Features
- Dense, uniform, void-free triple refined MDF panel
- Ships bare / unfinished - sanded and ready to finish your way
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 1.75 cu ft |
| Tuning | 33.0 Hz |
| Port Area | 25.31 sq in |
| Port Dimensions | 13.5" x 1.875" |
| Sub Cutout | 11.125" |
| Construction | Dense, uniform, void-free triple refined MDF panel |
| Finish | Ships bare / unfinished - sanded and ready to finish your way |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions (HxWxD) | 15.0" x 21.75" x 17.0" |
