Sundown Audio SA v3 8 Single Bundle (MDF)
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
How this package ships
- Two separate deliveries. Your subwoofer ships from JS Ultimate Sounds and usually arrives first.
- Separate tracking numbers. You will get one for each delivery, so a tracking link showing only part of your order is normal.
- The enclosure is built to order by Basshead Supply and ships direct from them in about 2 to 3 weeks.
- The subwoofer is not pre-installed. You mount it in the enclosure once both have arrived.
- The enclosure arrives bare and sanded, ready for you to finish however you like.
What is included
- (1) Sundown Audio SA-Series v.3 8" Subwoofer 600W RMS
- (1) Sundown Audio SAV3 MDF 8" Single Ported Subwoofer Enclosure
Priced 10% below buying the subwoofer and enclosure separately.
Choose your impedance below.
Sundown Audio SA-Series v.3 8" Subwoofer 600W RMS
- Power — 600W RMS / 1200W Peak
- Voice Coil — Dual 2 or 4 ohm
- Excursion — 16mm one-way linear, double linear mechanical capacity
- Motor — Vented magnetic gap with 16 chamfered vents and aluminum faraday ring
- Frame — Patented high-strength cast aluminum
This Listing Includes: (1) Sundown Audio SA-Series v.3 8" Subwoofer
The SA 8-inch is the pinnacle of low-distortion ported-box subwoofer technology, completely custom tooled with a full 16mm of one-way linear excursion and mechanical capacity exceeding double the linear limits for durability and low distortion. A large aluminum faraday ring smooths acoustic response while the low-distortion motor handles 600W RMS (1200W peak) across dual 2 or 4 ohm coils. The v.3 update adds a new surround with linear geometry and improved thermal performance via 16 chamfered gap vents that keep high-velocity air flowing over the voice coil.
Features
- Vented magnetic gap with 16 chamfered vents
- Large aluminum faraday ring for smooth acoustic response
- Patented high-strength cast aluminum frame
- Low-distortion motor construction with high-temperature voice coil wire
- Spring-loaded terminals with stitched-on XL tinsel leads
Specifications
| RMS Power | 600 Watts |
| Peak Power | 1200 Watts |
| Impedance | Dual 2 ohm or Dual 4 ohm |
| Linear Excursion | 16mm one-way |
| Frame | Cast aluminum |
| Recommended Enclosure | Ported |
Sundown Audio SAV3 MDF 8" Single Ported Subwoofer Enclosure
- Net Volume - 0.65 cu ft
- Tuning - 35.0 Hz
- Port Area - 9.36 sq in
- Sub Cutout - 7.375"
- Construction - Dense, uniform, void-free triple refined MDF panel
This Listing Includes: (1) Basshead Supply ported enclosure for the Sundown Audio SAV3 MDF 8" subwoofer
This enclosure is custom built specifically for the Sundown Audio SAV3 MDF 8" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.
Features
- Dense, uniform, void-free triple refined MDF panel
- Ships bare / unfinished - sanded and ready to finish your way
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 0.65 cu ft |
| Tuning | 35.0 Hz |
| Port Area | 9.36 sq in |
| Port Dimensions | 9.0" x 1.04" |
| Sub Cutout | 7.375" |
| Construction | Dense, uniform, void-free triple refined MDF panel |
| Finish | Ships bare / unfinished - sanded and ready to finish your way |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions (HxWxD) | 10.5" x 23.0" x 10.0" |
