Sundown Audio SA v2 18 Single Bundle
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 in the contiguous US. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
Bundle Includes: Sundown Audio SA-Series v.2 18" Subwoofer 1250W RMS + Sundown Audio SAV2 MDF 18" Single Ported Subwoofer Enclosure
Priced at 10% off the combined retail price of the subwoofer and enclosure bought separately. Select your impedance below.
Sundown Audio SA-Series v.2 18" Subwoofer 1250W RMS
- Power Handling — 1250 Watts RMS / 2500 Watts Peak
- Impedance — Dual 2 or Dual 4 ohm voice coils
- Voice Coil — Aluminum 2.75" former, high-temperature copper wire
- Motor — Larger-diameter motor with magnet ID Faraday ring
- Excursion — ~19mm one-way linear, 37mm one-way x-mech
This Listing Includes: (1) Sundown Audio SA-Series v.2 18" Subwoofer
The SA v.2 18" is a top-down upgrade of the original SA series, handling 1250 watts RMS / 2500 watts peak. Its 2.75" aluminum-former coil punches above its weight, outperforming many 3" coils without the added mass while allowing a wider spider. A large magnet shorting (Faraday) ring reduces distortion for smoother response across the spectrum, and a vented magnetic gap and pole piece keep the coil cool. The motor and coil mate to a robust multi-layer spider with doubled-up XL tinsel leads, a competition-grade paper cone, strong foam surround, and cast-aluminum frame. With ~19mm of one-way linear excursion and a 37mm x-mech limit, the 18" uses a larger-diameter motor to drive its higher mass. In stock and shipping free from JS Ultimate Sounds — your authorized Sundown Audio dealer.
Features
- Aluminum 2.75" voice coil former for superior heat dissipation
- Vented magnetic gap and pole piece
- Magnet ID Faraday ring for smooth acoustic response
- High-velocity cast-aluminum vented frame spacer ring
- Spring-loaded terminals with stitched-on double XL tinsel leads
Specifications
| Power Handling (RMS) | 1250 Watts |
| Power Handling (Peak) | 2500 Watts |
| Impedance Options | Dual 2 ohm (D2) / Dual 4 ohm (D4) |
| Voice Coil | Aluminum 2.75" former, high-temperature copper |
| Linear Excursion | ~19mm one-way |
| X-Mech Limit | 37mm one-way |
Sundown Audio SAV2 MDF 18" Single Ported Subwoofer Enclosure
- Net Volume - 5.5 cu ft
- Tuning - 30.0 Hz
- Port Area - 79.22 sq in
- Sub Cutout - 16.69"
- Construction - Dense, uniform, void-free triple refined MDF panel
This Listing Includes: (1) Basshead Supply ported enclosure for the Sundown Audio SAV2 MDF 18" subwoofer
This enclosure is custom built specifically for the Sundown Audio SAV2 MDF 18" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Made to order (2-3 week lead time) and shipping from JS Ultimate Sounds, your Basshead Supply dealer.
Features
- Dense, uniform, void-free triple refined MDF panel
- Ships bare / unfinished - sanded and ready to finish your way
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 5.5 cu ft |
| Tuning | 30.0 Hz |
| Port Area | 79.22 sq in |
| Port Dimensions | 16.25" x 4.875" |
| Sub Cutout | 16.69" |
| Construction | Dense, uniform, void-free triple refined MDF panel |
| Finish | Ships bare / unfinished - sanded and ready to finish your way |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions (HxWxD) | 17.75" x 39.875" x 21.75" |
