Sundown Audio NS v6 10 Dual Bundle (Baltic Birch)
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
How this package ships
- Two separate deliveries. Your subwoofers ship from JS Ultimate Sounds and usually arrive first.
- Separate tracking numbers. You will get one for each delivery, so a tracking link showing only part of your order is normal.
- The enclosure is built to order by Basshead Supply and ships direct from them in about 2 to 3 weeks.
- The subwoofers are not pre-installed. You mount them in the enclosure once both have arrived.
- The enclosure arrives finished in a gray stain, ready to install.
What is included
- (2) Sundown Audio Nightshade NS-Series NS6 10" 3500W Subwoofer NS v.6s
- (1) Sundown Audio NSV6 10" Dual Ported Subwoofer Enclosure, Baltic Birch
Priced 10% below buying the subwoofers and enclosure separately.
Choose your impedance below.
Sundown Audio Nightshade NS-Series NS6 10" 3500W Subwoofer NS v.6
- Power — 3,500W RMS / 7,000W Peak
- Impedance — Dual 1-ohm or dual 2-ohm voice coils
- Voice Coil — Eight-layer voice coil
- Motor — Neodymium with extended shorting ring
- Cooling — Cast aluminum cooling ring, outer fin array and aluminum vent ring
This Listing Includes: (2) Sundown Audio Nightshade NS-Series NS6 10" Subwoofers NS v.6
The Nightshade Neodymium subwoofer is engineered for powerful low end, extremely linear excursion, and next-level thermal management. It features an eight-layer voice coil for excellent power handling and an extended shorting ring to minimize distortion for smooth, accurate sound at extreme SPL levels. Thermal control is optimized with a cast aluminum cooling ring, outer fin array, and aluminum vent ring that actively pull heat away from the voice coil gap, while a unique air exchange system provides active cooling during extended use. A Mega Roll V2 surround keeps cone movement linear with class-leading Xmax.
Features
- Eight-layer voice coil for excellent power handling
- Extended shorting ring to minimize distortion
- Cast aluminum cooling ring with outer fin array and aluminum vent ring
- Unique air exchange system for active cooling
- Ultra-linear Mega Roll V2 surround
Specifications
| RMS Power | 3,500 watts |
| Peak Power | 7,000 watts |
| Impedance | Dual 1-ohm or Dual 2-ohm |
| Voice Coil | Eight-layer |
| Motor | Neodymium with extended shorting ring |
| Surround | Mega Roll V2 |
Sundown Audio NSV6 10" Dual Ported Subwoofer Enclosure
- Net Volume - 3.0 cu ft
- Tuning - 32.0 Hz
- Port Area - 43.8 sq in
- Sub Cutout - 10.11"
- Construction - 1" (24mm) plywood construction
This Listing Includes: (1) Basshead Supply ported enclosure for the Sundown Audio NSV6 10" subwoofer
This enclosure is custom built specifically for the Sundown Audio NSV6 10" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.
Features
- 1" (24mm) plywood construction
- 17 ply birch veneer construction
- Gray stained finish
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 3.0 cu ft |
| Tuning | 32.0 Hz |
| Port Area | 43.8 sq in |
| Port Dimensions | 12.0" x 3.65" |
| Sub Cutout | 10.11" |
| Construction | 1" (24mm) plywood construction |
| Finish | Gray stained finish |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions (HxWxD) | 14.0" x 32.0" x 22.5" |
