Sundown Audio M 12 Single Bundle (Baltic Birch)
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
How this package ships
- Two separate deliveries. Your subwoofer ships from JS Ultimate Sounds and usually arrives first.
- Separate tracking numbers. You will get one for each delivery, so a tracking link showing only part of your order is normal.
- The enclosure is built to order by Basshead Supply and ships direct from them in about 2 to 3 weeks.
- The subwoofer is not pre-installed. You mount it in the enclosure once both have arrived.
- The enclosure arrives finished in a gray stain, ready to install.
What is included
- (1) Sundown Audio M-Series M12 2000W Subwoofer
- (1) Sundown Audio M Series 12" Single Ported Subwoofer Enclosure, Baltic Birch
Priced 10% below buying the subwoofer and enclosure separately.
Choose your impedance below.
Sundown Audio M-Series M12 2000W Subwoofer
- Power Handling — 2,000W RMS / 4,000W Peak
- Voice Coil — 3" 4-layer round wire aluminum on aluminum former
- Excursion — 35mm one-way linear excursion
- Impedance — Available in Dual 1 Ohm and Dual 2 Ohm
- Motor — Quad-stacked 200mm (7.87") motor, 88mm magnet stack, 20mm top-plate
This Listing Includes: (1) Sundown Audio M-Series M12 12" Subwoofer
The M12 is the entry point into Sundown's Mega series, handling 2,000 watts RMS and 4,000 watts peak in Dual 1 or Dual 2 Ohm configurations. It mates a patented Mega series frame to a quad-stacked 200mm (7.87") motor structure with an 88mm magnet stack height, a hyper-extended pole, and a full 20mm thick top-plate. A 3" 4-layer round wire aluminum voice coil wound on a thick aluminum former drives a full 35mm one-way linear excursion. Sundown's high-stroke cooling system uses a high-velocity pole vent, a heavily vented magnetic gap, and a cast-aluminum frame-base venting system, while the Mega-Roll surround and PG linear suspension keep distortion low. Unlike other Mega platform woofers, the M-series also suits sealed and IB applications.
Features
- 2,000W RMS / 4,000W peak in Dual 1 or Dual 2 Ohm
- 3" 4-layer round wire aluminum voice coil, 35mm one-way linear excursion
- Quad-stacked 200mm motor with hyper-extended pole and 20mm top-plate
- Mega-Roll surround and computer-optimized PG linear suspension
- Magnet inner-diameter aluminum shorting ring for low inductive distortion
Specifications
| RMS Power | 2,000W |
| Peak Power | 4,000W |
| Impedance Options | Dual 1 Ohm, Dual 2 Ohm |
| Voice Coil | 3" 4-Layer Round Wire Aluminum |
| Linear Excursion | 35mm one-way |
| Motor | Quad-Stacked 200mm (7.87"), 88mm Magnet Stack |
| Top Plate | 20mm thick |
Sundown Audio M Series 12" Single Ported Subwoofer Enclosure
- Net Volume - 2.5 cu ft
- Tuning - 31.0 Hz
- Port Area - 36.68 sq in
- Sub Cutout - 11.19"
- Construction - 1" (24mm) plywood construction
This Listing Includes: (1) Basshead Supply ported enclosure for the Sundown Audio M Series 12" subwoofer
This enclosure is custom built specifically for the Sundown Audio M Series 12" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.
Features
- 1" (24mm) plywood construction
- 17 ply birch veneer construction
- Gray stained finish
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 2.5 cu ft |
| Tuning | 31.0 Hz |
| Port Area | 36.68 sq in |
| Port Dimensions | 14.0" x 2.62" |
| Sub Cutout | 11.19" |
| Construction | 1" (24mm) plywood construction |
| Finish | Gray stained finish |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions (HxWxD) | 16.0" x 26.875" x 19.75" |
