Resilient Sounds Platinum v2 10" Single Bundle (Baltic Birch)
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
How this package ships
- Two separate deliveries. Your subwoofer ships from JS Ultimate Sounds and usually arrives first.
- Separate tracking numbers. You will get one for each delivery, so a tracking link showing only part of your order is normal.
- The enclosure is built to order by Basshead Supply and ships direct from them in about 2 to 3 weeks.
- The subwoofer is not pre-installed. You mount it in the enclosure once both have arrived.
- The enclosure arrives finished in a gray stain, ready to install.
What is included
- (1) Resilient Sounds Platinum 10 V2 Subwoofer 5,000W Max / 2,500W RMS
- (1) Resilient Sounds Platinum v2 10" Single Ported Subwoofer Enclosure, Baltic Birch
Priced 10% below buying the subwoofer and enclosure separately.
Choose your impedance below.
Resilient Sounds Platinum 10 V2 Subwoofer 5,000W Max / 2,500W RMS
- 5,000W Max / 2,500W RMS — 10" high-output car subwoofer
- Triple stacked motor, 3" 8-layer coil — built for excursion and heat
- Carbon fiber cone, Cast aluminum frame
- Recommended enclosure 1.5-2.25 cu ft tuned 28-33 Hz
This Listing Includes: (1) Resilient Sounds Platinum 10 V2 Subwoofer
The Resilient Sounds Platinum 10 V2 is a 10" car subwoofer rated at 5,000W Max / 2,500W RMS. Engineered for deep, hard-hitting bass with a stout motor and high-excursion build for daily drivers and SPL alike.
Specifications
| Brand | Resilient Sounds |
| Size | 10" |
| RMS Power | 2,500W |
| Max Power | 5,000W |
| Coil | 3" 8-layer |
| Motor | Triple stacked |
| Cone | Carbon fiber |
| Frame | Cast aluminum |
| Mounting Depth | 9.125" |
| Cutout Diameter | 9.25" |
| Displacement | 0.22 cu ft |
| Recommended Enclosure | 1.5-2.25 cu ft |
| Recommended Tuning | 28-33 Hz |
Resilient Sounds Platinum v2 10" Single Ported Subwoofer Enclosure
- Net Volume - 1.5 cu ft
- Tuning - 32.0 Hz
- Port Area - 21.72 sq in
- Sub Cutout - 9.4375"
- Construction - 1" (24mm) plywood construction
This Listing Includes: (1) Basshead Supply ported enclosure for the Resilient Sounds Platinum v2 10" subwoofer
This enclosure is custom built specifically for the Resilient Sounds Platinum v2 10" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, including the Resilient Sounds Gold V2 10" Single Bundle built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.
Features
- 1" (24mm) plywood construction
- 17 ply birch veneer construction
- Gray stained finish
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 1.5 cu ft |
| Tuning | 32.0 Hz |
| Port Area | 21.72 sq in |
| Port Dimensions | 12.0" x 1.81" |
| Sub Cutout | 9.4375" |
| Construction | 1" (24mm) plywood construction |
| Finish | Gray stained finish |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions (HxWxD) | 14.0" x 23.75" x 17.0" |
