Pride Audio Rapid Monoblock Amplifier 1800W RMS
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 in the contiguous US. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
Subwoofer Wiring Diagram
Select your configuration to view possible wiring combinations.
Loading wiring diagrams…
Diagrams are on our wiring diagram page.
%0A%20%20%0ARMS%20Power%20at%202%20Ohm%20%E2%80%94%201100W%0A%20%20%0ARMS%20Power%20at%204%20Ohm%20%E2%80%94%20650W%0A%20%20%0AFrequency%20Response%20%E2%80%94%2015%E2%80%93270%20Hz%0A%20%20%0AOperation%20%E2%80%94%20bridge%20and%20array%20(link)%20modes;%20stable%20to%20...
){kind=link}
- RMS Power at 1 Ohm — 1800W (14.8V, KNI ~5%)
- RMS Power at 2 Ohm — 1100W
- RMS Power at 4 Ohm — 650W
- Frequency Response — 15–270 Hz
- Operation — bridge and array (link) modes; stable to 0.5 Ohm with a suitable subwoofer load
This Listing Includes: (1) Rapid Monoblock Amplifier 1800W RMS
The Pride Rapid is a single-channel monoblock amplifier that runs stably into a 1 Ohm load. It delivers 1800W at 1 Ohm at 14.8 volts with distortion (KNI) around 5%, plus 1100W at 2 Ohm and 650W at 4 Ohm across a 15–270 Hz range. It can operate in both bridge and array (link) modes and connect to loads as low as 0.5 Ohm when the subwoofer voice coils are rated for it. A remote input-sensitivity control includes an LED indicator for the permissible distortion threshold, and the amplifier is built on Korean circuitry refined by Russian engineers. In stock and shipping free from JS Ultimate Sounds — your authorized Pride Audio dealer.
Features
- Monoblock design, stable at 1 Ohm
- 1800W RMS into 1 Ohm at 14.8V, KNI ~5%
- Stable down to a 0.5 Ohm subwoofer load
- Bridge and array (link) operation
- Remote sensitivity control with LED distortion indicator
Specifications
| Brand | Pride Audio |
| Model / SKU | RAP.18 |
| Configuration | Monoblock (1-channel) |
| RMS Power at 1 Ohm | 1800W |
| RMS Power at 2 Ohm | 1100W |
| RMS Power at 4 Ohm | 650W |
| Frequency Response | 15–270 Hz |
| Voltage | 14.8V |
| Distortion (KNI) | ~5% |
