DC Audio XL Elite 12" Dual Bundle (Baltic Birch)
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
How this package ships
- Two separate deliveries. Your subwoofers ship from JS Ultimate Sounds and usually arrive first.
- Separate tracking numbers. You will get one for each delivery, so a tracking link showing only part of your order is normal.
- The enclosure is built to order by Basshead Supply and ships direct from them in about 2 to 3 weeks.
- The subwoofers are not pre-installed. You mount them in the enclosure once both have arrived.
- The enclosure arrives finished in a gray stain, ready to install.
What is included
- (2) DC Audio XL Elite Subwoofer 2200W RMS
- (1) DC Audio XL Elite 12" Dual Ported Subwoofer Enclosure, Baltic Birch
Priced 10% below buying the subwoofers and enclosure separately.
Choose your impedance below.
DC Audio XL Elite Subwoofer 2200W RMS
- 2200W RMS / 4400W Peak — evolution of DC's #1-selling XL line
- 3" 8-layer flat-wound aluminum coil — redesigned motor with pole vent and larger magnets
- Quad 10" spiders + aluminum shorting ring — FEA-optimized and mated to the DC frame
- Rigid non-pressed paper cone — 8 AWG DC OFC direct leads
- Available 12"–18", dual 0.7, 1, 1.4, 2 or 4 ohm — known for performance and looks
This Listing Includes: (2) DC Audio XL Elite Subwoofers
The DC Audio XL Elite (M5) is an evolution of DC's #1-selling XL subwoofer line, rated 2,200 watts RMS. A redesigned motor with a pole vent and larger magnets is FEA-optimized and mated to the heavy-duty DC frame, driving a 3" 8-layer flat-wound aluminum coil on quad 10" spiders for serious control. A rigid non-pressed paper cone, aluminum shorting ring and 8 AWG OFC direct leads round out a sub that's as famous for its looks as its output — hand-built in the USA.
Features
- 3" 8-layer flat-wound aluminum voice coil
- Redesigned FEA-optimized motor with pole vent + larger magnets
- Quad 10" OD spiders
- Aluminum shorting ring, 8 AWG DC OFC direct leads
- Cast heavy-duty DC aluminum frame
Specifications
| RMS Power | 2,200W |
| Peak Power | 4,400W |
| Voice Coil | 3" 8-layer flat-wound aluminum |
| Spiders | Quad 10" |
| Cone | Non-pressed paper |
| Frame | Cast heavy-duty DC aluminum |
| Available Sizes | 12", 15", 18" |
| Impedance | Dual 0.7, 1, 1.4, 2 or 4 Ohm |
| Build | Hand-built USA (7–14 days) |
DC Audio XL Elite 12" Dual Ported Subwoofer Enclosure
- Net Volume - 4.0 cu ft
- Tuning - 32.0 Hz
- Port Area - 58.12 sq in
- Sub Cutout - 11.15"
- Construction - 1" (24mm) plywood construction
This Listing Includes: (1) Basshead Supply ported enclosure for the DC Audio XL Elite 12" subwoofer
This enclosure is custom built specifically for the DC Audio XL Elite 12" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.
Features
- 1" (24mm) plywood construction
- 17 ply birch veneer construction
- Gray stained finish
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 4.0 cu ft |
| Tuning | 32.0 Hz |
| Port Area | 58.12 sq in |
| Port Dimensions | 15.0" x 3.875" |
| Sub Cutout | 11.15" |
| Construction | 1" (24mm) plywood construction |
| Finish | Gray stained finish |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions (HxWxD) | 17.0" x 36.875" x 20.0" |
