DC Audio NEO 3.5 12" Single Bundle
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
%20DC%20Audio%20NEO%20Elite%203.5%20Subwoofer%203500W%20RMS%20+%20(1)%20DC%20Audio%20NEO%203.5%2012%22%20Single%20Ported%20Subwoofer%20EnclosurePriced%20at%2010%25%20off%20the%20combined%20retail%20price%20of%20the%20subwoofer%20and%20enclosur...
){kind=link}
Bundle Includes: (1) DC Audio NEO Elite 3.5 Subwoofer 3500W RMS + (1) DC Audio NEO 3.5 12" Single Ported Subwoofer Enclosure
Priced at 10% off the combined retail price of the subwoofer and enclosure bought separately. Select your impedance below.
DC Audio NEO Elite 3.5 Subwoofer 3500W RMS
- 3500W RMS / 6000W Peak — DC's 3.5" coil neo-powered subwoofer
- Large flat-wound 3.5" coil + 6 columns of neo — built for high-power ground-pounder duty
- Dual 10" spaced spiders — multi-tensile leads sewn to the top spider
- Kraft-pulp fiber-reinforced cone — wide long-throw surround, 8 AWG OFC direct leads
- Available 12"–18", dual 0.7, 1, 1.4 or 2 ohm — stock LR cone/surround
This Listing Includes: (1) DC Audio NEO Elite 3.5 Subwoofer
The DC Audio NEO Elite 3.5 is DC's 3.5" coil neo-powered subwoofer — happy doing SPL but even better suited to high-power ground-pounder builds, rated 3,500 watts RMS. A large flat-wound 3.5" coil, six columns of neo, dual 10" spaced spiders and a high-performance kraft-pulp cone let it take a lot of power, get loud and crush lows. Hand-built in the USA on the DC frame (7–14 day build).
Features
- 3.5" 8-layer hi-temp aluminum coil on black-anodized former
- 6 columns of neodymium motor
- Dual 10" OD spaced spiders
- Kraft-pulp fiber-reinforced cone, wide long-throw surround
- 8 AWG OFC direct leads, cast DC-series aluminum frame
Specifications
| RMS Power | 3,500W |
| Peak Power | 6,000W |
| Voice Coil | 3.5" 8-layer aluminum |
| Motor | Neodymium (6 columns) |
| Spiders | Dual 10" spaced |
| Cone | Kraft-pulp fiber-reinforced (LR) |
| Available Sizes | 12", 15", 18" |
| Impedance | Dual 0.7, 1, 1.4 or 2 Ohm |
| Build | Hand-built USA (7–14 days) |
DC Audio NEO 3.5 12" Single Ported Subwoofer Enclosure
- Net Volume - 2.0 cu ft
- Tuning - 32.0 Hz
- Port Area - 28.88 sq in
- Sub Cutout - 11.15"
- Construction - 1" (24mm) plywood construction
This Listing Includes: (1) Basshead Supply ported enclosure for the DC Audio NEO 3.5 12" subwoofer
This enclosure is custom built specifically for the DC Audio NEO 3.5 12" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Made to order (2-3 week lead time) and shipping from JS Ultimate Sounds, your Basshead Supply dealer.
Features
- 1" (24mm) plywood construction
- 17 ply birch veneer construction
- Gray stained finish
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 2.0 cu ft |
| Tuning | 32.0 Hz |
| Port Area | 28.88 sq in |
| Port Dimensions | 14.0" x 2.0625" |
| Sub Cutout | 11.15" |
| Construction | 1" (24mm) plywood construction |
| Finish | Gray stained finish |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions (HxWxD) | 16.0" x 21.875" x 19.75" |
