DC Audio Level 6 15" Dual Bundle (Baltic Birch)
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
How this package ships
- Two separate deliveries. Your subwoofers ship from JS Ultimate Sounds and usually arrive first.
- Separate tracking numbers. You will get one for each delivery, so a tracking link showing only part of your order is normal.
- The enclosure is built to order by Basshead Supply and ships direct from them in about 2 to 3 weeks.
- The subwoofers are not pre-installed. You mount them in the enclosure once both have arrived.
- The enclosure arrives finished in a gray stain, ready to install.
What is included
- (2) DC Audio Level 6 M6 Subwoofer 4500W RMS
- (1) DC Audio Level 6 15" Dual Ported Subwoofer Enclosure, Baltic Birch
Priced 10% below buying the subwoofers and enclosure separately.
Choose your impedance below.
DC Audio Level 6 M6 Subwoofer 4500W RMS
- 4500W RMS / 8000W Peak — DC's 4" coil beast for big-power builds
- 4.0" 8-layer flat-wound aluminum coil — wire-cut top plate, extended pole and full inner aluminum sleeve shorting ring
- Dual 10" spaced spiders + extra Xmax clearance — rearward coil clearance for big excursion
- Kraft-pulp fiber-reinforced cone — wide long-throw surround; carbon-fiber cone option available
- Available 12"–18", dual 0.7, 1, 1.4 or 2 ohm — SPL lanes or the cruise strip
This Listing Includes: (2) DC Audio Level 6 M6 Subwoofers
The DC Audio Level 6 M6 Elite is DC's 4" coil beast — a 4,500-watt RMS driver built to keep up with today's biggest amplifiers. A large flat-wound 4" coil, full inner-aluminum-sleeve shorting ring, extended pole and dual 10" spaced spiders give it the power handling and Xmax clearance to crush the lows in the SPL lanes or on the cruise strip. A kraft-pulp reinforced cone and wide long-throw surround handle the excursion, with carbon-fiber cone and dustcap options available; hand-built in the USA.
Features
- 4.0" 8-layer flat-wound aluminum coil on black-anodized former
- Full inner-aluminum-sleeve shorting ring + extended pole
- Wire-cut top plate with rearward coil clearance
- Dual 10" OD spaced spiders
- Kraft-pulp fiber-reinforced cone, 8 AWG OFC direct leads
Specifications
| RMS Power | 4,500W |
| Peak Power | 8,000W |
| Voice Coil | 4.0" 8-layer flat-wound aluminum |
| Spiders | Dual 10" spaced |
| Cone | Kraft-pulp fiber-reinforced |
| Frame | Cast DC-series aluminum |
| Available Sizes | 12", 15", 18" |
| Impedance | Dual 0.7, 1, 1.4 or 2 Ohm |
| Build | Hand-built USA (7–14 days) |
DC Audio Level 6 15" Dual Ported Subwoofer Enclosure
- Net Volume - 8.5 cu ft
- Tuning - 31.0 Hz
- Port Area - 122.4 sq in
- Sub Cutout - 14.25"
- Construction - 1" (24mm) plywood construction
This Listing Includes: (1) Basshead Supply ported enclosure for the DC Audio Level 6 15" subwoofer
This enclosure is custom built specifically for the DC Audio Level 6 15" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.
Features
- 1" (24mm) plywood construction
- 17 ply birch veneer construction
- Gray stained finish
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 8.5 cu ft |
| Tuning | 31.0 Hz |
| Port Area | 122.4 sq in |
| Port Dimensions | 20.0" x 6.12" |
| Sub Cutout | 14.25" |
| Construction | 1" (24mm) plywood construction |
| Finish | Gray stained finish |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions (HxWxD) | 22.0" x 47.625" x 22.625" |
