DC Audio Level 4 10" Dual Bundle
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
%20DC%20Audio%20Level%204%20M4%20Subwoofer%201500W%20RMS%20+%20(1)%20DC%20Audio%20Level%204%2010%22%20Dual%20Ported%20Subwoofer%20EnclosurePriced%20at%2010%25%20off%20the%20combined%20retail%20price%20of%20the%20subwoofers%20and%20enclosure%20bo...
){kind=link}
Bundle Includes: (2) DC Audio Level 4 M4 Subwoofer 1500W RMS + (1) DC Audio Level 4 10" Dual Ported Subwoofer Enclosure
Priced at 10% off the combined retail price of the subwoofers and enclosure bought separately. Select your impedance below.
DC Audio Level 4 M4 Subwoofer 1500W RMS
- 1500W RMS / 3000W Peak — a step up in SQ and heat dissipation over the m3
- 3" 8-layer flat-wound aluminum coil — on a black-anodized former for high, sustained power
- 2.5mm aluminum shorting ring + 23.5mm Xmax — reduced inductance and power compression
- Large triple-stacked motor — triple 8" progressive-roll spiders for control
- Available 10"–18", dual 1, 2 or 4 ohm — smashing lows with fantastic power handling
This Listing Includes: (2) DC Audio Level 4 M4 Subwoofers
The DC Audio Level 4 M4 steps forward in sound quality and heat dissipation over the previous m3, rated 1,500 watts RMS. A large triple-stacked motor with a 2.5mm aluminum shorting ring cuts inductance and power compression while acting as an internal heatsink, and direct-to-coil venting keeps a 3" 8-layer flat-wound aluminum coil cool through 23.5mm of Xmax. Triple 8" progressive-roll spiders and a rigid paper cone keep it linear; hand-built in the USA (7–14 day build).
Features
- 3" 8-layer flat-wound aluminum coil on black-anodized former
- 2.5mm aluminum shorting (demodulation) ring
- Large triple-stacked FEA-optimized motor
- Triple 8" OD progressive-roll spiders
- Cast aluminum frame, hand-built in the USA
Specifications
| RMS Power | 1,500W |
| Peak Power | 3,000W |
| Voice Coil | 3" 8-layer flat-wound aluminum |
| Xmax | 23.5mm |
| Cone | Non-pressed paper |
| Frame | Cast aluminum |
| Available Sizes | 10", 12", 15", 18" |
| Impedance | Dual 1, 2 or 4 Ohm |
| Build | Hand-built USA (7–14 days) |
DC Audio Level 4 10" Dual Ported Subwoofer Enclosure
- Net Volume - 2.3 cu ft
- Tuning - 34.0 Hz
- Port Area - 33.06 sq in
- Sub Cutout - 9.35"
- Construction - 3/4" (18mm) birch plywood construction
This Listing Includes: (1) Basshead Supply ported enclosure for the DC Audio Level 4 10" subwoofer
This enclosure is custom built specifically for the DC Audio Level 4 10" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Made to order (2-3 week lead time) and shipping from JS Ultimate Sounds, your Basshead Supply dealer.
Features
- 3/4" (18mm) birch plywood construction
- 13 ply birch veneer construction (1" Baffle 17 ply)
- Gray stained finish
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 2.3 cu ft |
| Tuning | 34.0 Hz |
| Port Area | 33.06 sq in |
| Port Dimensions | 11.5" x 2.875" |
| Sub Cutout | 9.35" |
| Construction | 3/4" (18mm) birch plywood construction |
| Finish | Gray stained finish |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions (HxWxD) | 13.0" x 30.25" x 18.25" |
