DC Audio Level 3 15" Single Bundle
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
%20DC%20Audio%20Level%203%20Subwoofer%201000W%20RMS%20+%20(1)%20DC%20Audio%20Level%203%2015%22%20Single%20Ported%20Subwoofer%20EnclosurePriced%20at%2010%25%20off%20the%20combined%20retail%20price%20of%20the%20subwoofer%20and%20enclosure%20boug...
){kind=link}
Bundle Includes: (1) DC Audio Level 3 Subwoofer 1000W RMS + (1) DC Audio Level 3 15" Single Ported Subwoofer Enclosure
Priced at 10% off the combined retail price of the subwoofer and enclosure bought separately. Select your impedance below.
DC Audio Level 3 Subwoofer 1000W RMS
- 1000W RMS / 2000W Peak — the ultimate daily-driver DC sub, hand-built in the USA
- 3" hi-temp aluminum coil on black-anodized former — with a 2.5mm aluminum shorting ring for lower inductance
- Triple-stacked FEA motor + 22.5mm Xmax — direct-to-coil venting keeps it cool under load
- Dual 8" progressive-roll spiders — rigid non-pressed paper cone for clean, deep output
- Available 10"–18", dual 1, 2 or 4 ohm — sealed or ported
This Listing Includes: (1) DC Audio Level 3 Subwoofer
The DC Audio Level 3 is the ultimate daily-driver subwoofer — 1,000 watts RMS of clean, deep output that's happy in sealed or ported boxes. A triple-stacked FEA-optimized motor with a 2.5mm aluminum shorting ring lowers inductance and pulls heat off the windings, while direct-to-coil venting cycles air across a 3" hi-temp aluminum coil for 22.5mm of controlled Xmax. Dual 8" progressive-roll spiders and a rigid paper cone keep it linear, and every one is hand-built in the USA (7–14 day build).
Features
- 3" hi-temp aluminum coil on black-anodized former
- 2.5mm aluminum shorting (demodulation) ring
- Triple-stacked FEA-optimized motor, fully CNC-machined
- Dual 8" OD semi-cup progressive-roll spiders
- Cast aluminum frame, hand-built in the USA
Specifications
| RMS Power | 1,000W |
| Peak Power | 2,000W |
| Voice Coil | 3" hi-temp aluminum |
| Xmax | 22.5mm |
| Cone | Non-pressed paper |
| Frame | Cast aluminum |
| Available Sizes | 10", 12", 15", 18" |
| Impedance | Dual 1, 2 or 4 Ohm |
| Build | Hand-built USA (7–14 days) |
DC Audio Level 3 15" Single Ported Subwoofer Enclosure
- Net Volume - 3.5 cu ft
- Tuning - 32.0 Hz
- Port Area - 51.15 sq in
- Sub Cutout - 14.0"
- Construction - 3/4" (18mm) birch plywood construction
This Listing Includes: (1) Basshead Supply ported enclosure for the DC Audio Level 3 15" subwoofer
This enclosure is custom built specifically for the DC Audio Level 3 15" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Made to order (2-3 week lead time) and shipping from JS Ultimate Sounds, your Basshead Supply dealer.
Features
- 3/4" (18mm) birch plywood construction
- 13 ply birch veneer construction (1" Baffle 17 ply)
- Gray stained finish
- Refined assembly - no visible screw holes
- Glued with Titebond III and internally braced
- Pre-wired recessed satin-nickel binding post with OFC 10-gauge wire
- Built by hand in the USA
Specifications
| Net Volume | 3.5 cu ft |
| Tuning | 32.0 Hz |
| Port Area | 51.15 sq in |
| Port Dimensions | 15.5" x 3.3" |
| Sub Cutout | 14.0" |
| Construction | 3/4" (18mm) birch plywood construction |
| Finish | Gray stained finish |
| Wiring | Pre-wired metal binding post with 10ga OFC wire |
| Dimensions (HxWxD) | 17.0" x 29.875" x 20.0" |
