DS18 Bass Package 1 X SLC-MD12 In a Ported Box with S-1500.1/RD Amplifier and 4-GA Amp Kit 250 Watts Rms
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 in the contiguous US. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
DS18 LSE-112A Bass Package 1 x SLC-MD12.4 In a Ported Box with S-1500.1/RD Amplifier and 4-GA Amp Kit 500 Watts
Looking for that perfect bass package but are overwhelmed by all the options? We have made it easy with our loaded subwoofer box the LSE112A! This is a prefabricated box that comes with one of our best selling subwoofers. Included is a beautiful carpeted box with DS18 logo designs tuned to 35 hz. The box is constructed by thick 1/2 MDF for great sound and resonance. The sub included is the very popular MD12.4 that is a single voice coil 4 ohm sub with a nominal impedance of 4 ohms that will require 250w rms. This loaded box is a great entry level solution to hard hitting heavy bass for all to enjoy.
Highlights
- The box is constructed of 1/2 inch MDF for great strength, resonance, and tuned to 35hz for low hitting bass.
- One SLC 12 inch sub will give you the cone area to push out great sounding bass without a lot of power requirements.
- Great design and carpeting with DS18 logos to give your system the flair it deserves and also brings a show quality look.
- Great durability so you can enjoy hard hitting bass for years to come.
What's in the package?
- S-1500.1 AMPLIFIER
| Amplifier | |
| Circuit Topology | Class AB Monoblock Amplifier |
| RMS Power Output @ 2 OHMS | 350 watts |
| RMS Power Output @ 4 OHMS | 220 watts |
| Total Harmonic Distortion | < 3% |
| S/N Ratio Ref 1w @ 4 OHMS | >90db |
| Gain Range | 0.2-6V |
| Crossover Range | 50-250hz |
| Frequency Range | 20Hz-500 Hz |
| Dimensions | 13.7/348mm x 5.8/148mm x 1.8 / 47.5mm |
-
4-GA AMP KIT - 500 WATTS
-
AGU Fuse Holder With AGU-100A
-
6ft. 4GA Loom Tube
-
Rubber Grommet
-
17ft. Red Power Cable: 21mm² OD: 10mm
-
3ft. Black Ground Cable: 21mm² OD: 10mm
-
17ft. Red/Black Twisted RCA Cable
-
17ft. Turn-On Cable: 20*0.15mm
-
17ft. Red/Black Speaker Cable: 1.31mm² x 2 wires OD 3.2 x 6.4mm
SLC-MD12 IN A PORTED BOX
| Model: | SLC-MD12 |
| Type: | Subwoofer |
| Size: | 12" |
| RMS Power: | 250W |
| MAX Power: | 500W |
| Impedance: | 4 |
| Voice Coil Size: | 2" |
| Magnet: | Ferrite |
| Magnet Size: | 42 oz |
Technical Details
| General | |
| Speaker Size | Single 12 |
| Total Impedance | 4 ohms |
| Total RMS Power Handling | 250 watts |
| Total MAX Power Handling | 500 watts |
| Sensitivity (1w/1m) | 93 db |
| Frequency Response | 29-250hz |
| Recommended Lo Pass Crossover | 80 Hz |
| Subwoofer | |
| Voice Coil Diameter | 50.8mm (2) |
| Voice Coil Former Material | Aluminum |
| Winding Material | ACCAW |
| Cone Material | PPI |
| Surround Material | Rubber |
| Basket Material | Steel |
| Magnet Material | Ferrite |
| Magnet Weight | 42 oz |
| Box Specifications | |
| Port Tune | 35hz |
| Dust Cap Material | 45.3L |
| Load Configuration | Front Ported |
| Box Material | 1/2" MDF |
| Finish Material | Vinyl |
| Measurements | |
| Height | 13.78 / 350mm |
| Width | 19.68 / 500mm |
| Depth 1 | 11 / 280mm |
| Depth2 | 14 / 356mm |
Manual
Authorized DS18 dealer at JS Ultimate Sounds. Free shipping on orders $99+.
