B2 Audio RIOT6P 6.5" Pro Audio Speaker 100W RMS 4 Ohm (Pair)
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
The B2 Audio RIOT6P is a 6.5-inch pro-audio midrange sold as a matched pair, built for loud, articulate vocals and midrange in motorcycle, powersports, and high-output vehicle builds. A UV-treated weatherproof paper cone and center bullet phase plug help it stay clear and consistent at high volume, while the shallow pro-audio basket makes it easy to load into pods, kick panels, or wall builds. It is the value-focused member of the RIOT lineup, aimed at anyone stacking multiple mids for a full "wall of sound" front stage.
Key Features
- 6.5" pro-audio midrange driver rated at 100W RMS (200W peak) per speaker
- Sold as a matched pair for left/right or multi-speaker arrays
- 4-ohm nominal impedance for straightforward amp and head-unit pairing
- 1.5" KCCAW voice coil for durable power handling and heat management
- 92 dB sensitivity delivers high output from moderate power
- UV-treated weatherproof paper cone resists moisture absorption and sun discoloration for outdoor and open-air installs
- Center bullet phase plug sharpens upper-midrange detail and on-axis clarity
- 23 oz ferrite motor for strong, controlled cone drive
Specifications
| Specification | Value |
|---|---|
| Size | 6.5" (165 mm) |
| Configuration | Sold in pairs |
| RMS Power (each) | 100W |
| Peak Power (each) | 200W |
| Nominal Impedance | 4 ohm |
| DC Resistance (Re) | 3.8 ohm |
| Sensitivity | 92 dB |
| Frequency Response | 140 Hz – 14 kHz |
| Resonance Frequency (Fs) | 140 Hz |
| Voice Coil Diameter | 1.5" (38.6 mm) |
| Voice Coil Material | KCCAW |
| Cone | UV-treated weatherproof paper with bullet phase plug |
| Magnet | 23 oz ferrite |
| Vas | 4 L |
| Qts | 1.0 |
Because these mids roll off below roughly 140 Hz, pair them with a subwoofer or dedicated woofer and cross them over on the high side to protect the driver and keep vocals up front. Run them off a clean, dedicated amp channel to reach their full output potential.
