10% off on high-output alternators
No code needed Discount applied at checkout
October 27 to November 2, 2026
American Bass XFL 12" Single Bundle (MDF)
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order, and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 within the contiguous US. Freight items may require delivery coordination; any shipping exceptions are shown before checkout. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
How this package ships
- Two separate deliveries. Your subwoofer ships from JS Ultimate Sounds and usually arrives first.
- Separate tracking numbers. You will get one for each delivery, so a tracking link showing only part of your order is normal.
- The enclosure is built to order by Basshead Supply and ships direct from them in about 2 to 3 weeks.
- The subwoofer is not pre-installed. You mount it in the enclosure once both have arrived.
- The enclosure arrives bare and sanded, ready for you to finish however you like.
What is included
- (1) American Bass XFL 12" Car Subwoofer 1500 Watts RMS Dual Voice Coil 2 Ohm or 4 Ohm
- (1) American Bass XFL 12" Single Ported Subwoofer Enclosure — 2.0 cu ft @ 33.0Hz, MDF
Priced 10% below buying the subwoofer and enclosure separately.
Choose your impedance below.
American Bass XFL 12" Car Subwoofer 1500 Watts RMS Dual Voice Coil 2 Ohm or 4 Ohm
- 1500W RMS / 3000W max — authoritative output in a standard 12" footprint
- Dual voice coil, 2Ω or 4Ω — flexible wiring for a wide range of amps
- 3" CCAW voice coil — holds composure under sustained power
- 8.34" mounting depth — fits cleanly in most standard enclosures
- XFL-1222 / XFL-1244 — Kevlar-reinforced cone on a cast aluminum basket
American Bass XFL 12" Car Subwoofer — 1500W RMS Dual Voice Coil (XFL-1222 / XFL-1244)
This Listing Includes:
- (1) American Bass XFL 12" Subwoofer
The American Bass XFL 12" is built for daily drivers and street builds that demand real output and real reliability. Rated at 1500W RMS and 3000W max, the XFL 12" pairs a 3" CCAW voice coil with a rigid cast aluminium basket and a Kevlar-reinforced cone that keeps excursion controlled under sustained power. Dual 2Ω or 4Ω voice coils give you the wiring flexibility to dial in your amp, and an 8.34" mounting depth drops it into most standard enclosures.
Features
- Kevlar fiber reinforced non-pressed paper cone for rigid, controlled excursion
- 3" CCAW voice coil for high power handling and reduced thermal compression
- Foam surround tuned for long, linear travel (17mm Xmax)
- Cast aluminium basket for rigidity under high power
- 200 oz ferrite magnet motor for strong, consistent control
Specifications
| RMS Power | 1500W |
| Max Power | 3000W |
| Impedance | Dual 2Ω (XFL-1222) or Dual 4Ω (XFL-1244) |
| Sensitivity | 86.2 dB (2Ω) / 86.5 dB (4Ω) |
| Voice Coil | 3" CCAW |
| Magnet | 200 oz ferrite |
| Cone | Kevlar fiber reinforced non-pressed paper |
| Surround | Foam |
| Basket | Cast aluminium |
| Mounting Depth | 8.34" |
| Cutout Diameter | 11.5" |
| Xmax | 17.0 mm |
| Fs | 35.34 Hz (2Ω) / 38.5 Hz (4Ω) |
| Qts | 0.44 (2Ω) / 0.45 (4Ω) |
| Qes | 0.491 (2Ω) / 0.493 (4Ω) |
| Qms | 4.936 (2Ω) / 5.153 (4Ω) |
| Vas | 30.21 L (2Ω) / 23.4 L (4Ω) |
| BL | 21.3 (2Ω) / 28.3 (4Ω) |
American Bass XFL 12" Single Ported Subwoofer Enclosure — 2.0 cu ft @ 33.0Hz
The American Bass XFL 12" Single Ported Subwoofer Enclosure is a subwoofer-specific ported enclosure custom-built by Basshead Supply for the American Bass XFL 12" subwoofer. Precision-cut and tuned for maximum output with clean, controlled low end.
Specifications
| Net Volume | 2.0 cu ft |
| Tuning Frequency | 33.0 Hz |
| Port Area | 28.69 sq in |
| Port Dimensions | 13.5" x 2.125" |
| Subwoofer Cutout | 11.4" |
| Construction | Triple-Refined MDF |
| External Dimensions | 15.0"H x 24.2"W x 17.0"D |
| Finish | Bare / unfinished (ready to finish) |
Ships bare / unfinished, sanded and ready to finish your way. Includes a pre-wired metal binding-post terminal with 10-gauge OFC lead wire. Built to order — typical lead time 2–3 weeks.
