American Bass SL 10" Car Subwoofer 300 Watts RMS Single Voice Coil 4 Ohm (Shallow Mount)
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 in the contiguous US. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
Subwoofer Wiring Diagram
Select your configuration to view possible wiring combinations.
Loading wiring diagrams…
Diagrams are on our wiring diagram page.
- 300W RMS / 600W Max — tidy bass for cramped installs
- Single 4Ω voice coil — straightforward amp matching
- 3.62" mounting depth — genuine shallow-mount fit
- 2" 4-layer voice coil on Nomex — dependable under load
- SL 10" (SL-104 / SL-1044) — 80 oz magnet, stamped basket
American Bass SL 10" Shallow-Mount Car Subwoofer — 300W RMS Single Voice Coil (SL-104 / SL-1044)
This Listing Includes:
- (1) American Bass SL 10" Shallow-Mount Subwoofer
The American Bass SL 10" proves you do not need a huge box to add real bass. At only 3.62" deep, this shallow-mount SL 10" slides into the tightest of spaces and still serves up clean, controlled low end from a 2" four-layer voice coil and 80 oz magnet. The single 4Ω coil makes hookup easy. Authorized American Bass dealer at JS Ultimate Sounds. Free shipping on orders $99+.
Features
- 2" hi-temp 4-layer voice coil on a Nomex bobbin
- Double stacked 80 oz strontium magnet
- Heavy-duty stamped basket with black powder finish
- Hi-roll high-density foam surround
- Composite paper cone
Specifications
| RMS Power | 300W |
| Max Power | 600W |
| Impedance | Single 4Ω |
| Sensitivity | 86.8 dB |
| Voice Coil Diameter | 2.0" |
| Magnet Weight | 80 oz |
| Basket | Stamped steel |
| Mounting Depth | 3.62" |
| Cutout Diameter | 9.06" |
| Fs | 38.2 Hz |
| Qts | 0.512 |
| Qes | 0.56 |
| Qms | 5.168 |
| Vas | 23.3 L |
| Xmax | 9.0 mm |
| BL | 9.1 |
| Mms | 103.9 g |
| Sd | 34.6 cm² |
