





VFL REBEL-3000.1 Class D High Performance Amplifier
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 in the contiguous US. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
Subwoofer Wiring Diagram
Select your configuration to view possible wiring combinations.
Loading wiring diagrams…
Diagrams are on our wiring diagram page.
- Monoblock Class D power: 980W @ 4Ω, 1905W @ 2Ω, 3000W @ 1Ω RMS
- Built to drive high-power subwoofers down to 1 ohm
- Variable bass boost (0–12dB) and full low/high-pass filtering
- Damping factor of 180 for tight, controlled bass
- 300A fuse rating with 4-way protection circuitry
VFL REBEL-3000.1 Class D Monoblock Car Amplifier — 3000W x 1 RMS @ 1Ω (REBEL-3000.1)
This Listing Includes:
- (1) VFL REBEL-3000.1 Monoblock Amplifier
Part of American Bass's VFL competition line, the REBEL-3000.1 is a Class D monoblock made to anchor a hard-hitting subwoofer system. It delivers a clean, stable 3000 watts RMS at 1 ohm with the control and headroom your low end deserves. Authorized American Bass dealer at JS Ultimate Sounds. Free shipping on orders $99+.
Features
- Class D monoblock design optimized for subwoofer duty
- 1-ohm stable for high-output bass systems
- Variable bass boost, 0dB – 12dB
- Low-pass filter (60Hz–20KHz) and high-pass filter (10Hz–1KHz)
- 4-way protection guards against thermal, voltage, and short faults
Specifications
| Number of Channels | 1 |
| Amplifier Class | Class D |
| RMS Power @ 4Ω | 980W x 1 |
| RMS Power @ 2Ω | 1905W x 1 |
| RMS Power @ 1Ω | 3000W x 1 |
| Bass Boost | 0dB – 12dB |
| Low-Pass Filter | 60Hz – 20KHz |
| High-Pass Filter | 10Hz – 1KHz |
| Signal-to-Noise Ratio | <90dB |
| THD | <0.1% |
| Damping Factor | 180 |
| Input Sensitivity | 0.4 – 4V |
| Fuse Rating | 300A |
| Dimensions (L x W x H) | 5.43" x 5.9" x 2.24" |


