DS18 DX 6.5" 3- Way Component Speaker System With Kevlar Cone 290 Watts Rms 4-Ohm
Many in-stock orders ship within 1-2 business days, but timing varies by item. Custom, built-to-order, oversized, special-order and supplier-direct products may need extra processing time. Free shipping applies to qualifying orders over $99 in the contiguous US. Approved returns may be subject to a restocking fee.
Most products are covered by the manufacturer's warranty against defects. Damage from over-powering or improper installation isn't covered — we'll help coordinate any valid claim.
Tell us your vehicle, subwoofers and electrical setup and our team will help you match the right gear. Reach out before you buy.
DS18 DX3 Kevlar 6.5” 3 Way Premium Quality Car Component Speaker System 580 Watts 4-Ohm
It’s the ultimate package for superior sound quality in your Car. Every piece of equipment you need to properly blast your Tunes comes included in this DS18 DX3 6.5” 3 Way Premium Quality Car Component Speaker System. Support for low frequencies is handled by two DX3W 6.5-inch woofers covered in Kevlar with an aluminum basket and ferrite motor. Handling the highs are two DX3T 1.18" Neodymium tweeters that complement sound with crisp and clear audio that will rock your socks off. Let’s not forget about the DX3M 3.5" mid which ushers in the best and purest vocals to complete the experience. Everything is in your control with the DX3C 3-way passive crossover which separates sounds from each individual device. Wattage and frequency are clearly distinct so each component can produce its best possible sound.
Highlights
- Comes with two DX3W 6.5-inch woofers, two DX3T 1.18" tweeters, two DX3M 3.5 inch midranges, and two DX3C passive 3-way crossovers
- Sound is separated to allow for premium audio production from each component
- Made from quality Kevlar and rubber material that will last a lifetime
- Tweeter Uses Neodymium magnets which boost clarity and power
DX3W Woofer Key Features
- 6.5” Kevlar Woofer
- Peak Power Handling: 400 Watts
- AES Power Handling: 100 Watts
- Frequency Response: 50Hz-12Khz
- Voice Coil Diameter: 1.2”
- Impedance: 4-Ohms
- Sensitivity (1W/1M): 89dB
- Magnet Weight: 20 Oz
- Magnet Material: Ferrite
- Mounting Depth: 2.85”
DX3T Tweeter Key Features
- 1.18” Tweeter
- Peak Power Handling: 60 Watts
- AES Power Handling: 15 Watts
- Frequency Response: 800Hz-20Khz
- Voice Coil Diameter: 0.98”
- Impedance: 4-Ohms
- Sensitivity (1W/1M): 90dB
- Magnet Weight: 14 Oz
- Magnet Material: Neodymium
- Mounting Depth: 0.7”
DX3M Midrange Key Features
- 3.5” Midrange
- Peak Power Handling: 120 Watts
- AES Power Handling: 30 Watts
- Frequency Response: 85Hz-20Khz
- Voice Coil Diameter: 1”
- Impedance: 4-Ohms
- Sensitivity (1W/1M): 89.4dB
- Magnet Weight: 5.5 Oz
- Magnet Material: Ferrite
- Mounting Depth: 1.59”
DX3C Crossover Key Features
- Passive Crossover Ways: 3 Ways
- Frequency Crossover: 800HZ (Mid) 3.8 Khz (Tw)
- Power Handling: 300 Watts
- Cut Off Slope: 6dB (Mid) 12dB (Tw)/ Oct
- Tweeter Attenuation: (+/-) 3dB
Enjoy rich and quality audio with the DX3 3 Way Premium Quality Car Component Speaker System and order yours today!
Technical Details
Ecl07056tj000001s6h66c5hc5EAuthorized DS18 dealer at JS Ultimate Sounds. Free shipping on orders $99+.
