{"title":"12-Inch Dual Subwoofer Enclosures","description":"\u003cp\u003eDual subwoofer enclosures built for a dual 12-inch setup. Matched air space and port tuning so the box suits the sub.\u003c\/p\u003e","products":[{"product_id":"resilient-sounds-dual-12-platinum-v2-ported-enclosure","title":"Resilient Sounds Dual 12\" Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12\" Ported subwoofer enclosure\u003c\/strong\u003e — tuned and ready to load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.5 cubic feet\u003c\/strong\u003e tuned to 32 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1\" (24mm) Russian Baltic Birch - 17 ply\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e65.0 sq in of port area\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCarbon gray stain with polyurethane topcoat finish\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Resilient Sounds Dual 12\" Ported Subwoofer Enclosure\u003c\/p\u003e\n\u003cp\u003eThis Resilient Sounds Dual 12\" ported enclosure is engineered for the matching Resilient Sounds subwoofer, or step up to the Resilient Sounds \u003cstrong\u003e\u003ca href=\"https:\/\/www.jsultimatesounds.com\/products\/resilient-sounds-dual-15-gold-ported-enclosure\"\u003eDual 15\" Ported Subwoofer Enclosure\u003c\/a\u003e\u003c\/strong\u003e for even greater output, then drop in your sub and start hitting harder with tuned, ready-to-load airspace.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eResilient Sounds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual 12\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePorted Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eNet Volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eTuning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003ePort Area\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e65.0 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.063\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eCutout\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11.175\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) Russian Baltic Birch - 17 ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eWiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Resilient Sounds","offers":[{"title":"Default Title","offer_id":66840311005229,"sku":"BHSP-RES-PTV2-D12-HD","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/resilient-sounds-dual-12-platinum-v2-ported-enclosure-w_4cbcaa92-c253-4914-9815-13c5cc6f3573.jpg?v=1782678133"},{"product_id":"resilient-sounds-dual-12-platinum-ported-enclosure","title":"Resilient Sounds Dual 12\" Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12\" Ported subwoofer enclosure\u003c\/strong\u003e — tuned and ready to load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.5 cubic feet\u003c\/strong\u003e tuned to 32 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1\" (24mm) Russian Baltic Birch - 17 ply\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e65.0 sq in of port area\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCarbon gray stain with polyurethane topcoat finish\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Resilient Sounds Dual 12\" Ported Subwoofer Enclosure\u003c\/p\u003e\n\u003cp\u003eThis Resilient Sounds Dual 12\" ported enclosure is engineered for the matching Resilient Sounds subwoofer, compare it with the Resilient Sounds \u003ca href=\"https:\/\/www.jsultimatesounds.com\/products\/resilient-sounds-dual-15-platinum-ported-enclosure\"\u003e\u003cstrong\u003eDual 15\" Platinum Ported Enclosure\u003c\/strong\u003e\u003c\/a\u003e — drop in your sub and start hitting harder with tuned, ready-to-load airspace.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eResilient Sounds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual 12\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePorted Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eNet Volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eTuning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003ePort Area\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e65.0 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.063\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eCutout\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) Russian Baltic Birch - 17 ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eWiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Resilient Sounds","offers":[{"title":"Default Title","offer_id":66840311300141,"sku":"BHSP-RES-PT-D12-HD","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/resilient-sounds-dual-12-platinum-ported-enclosure-w_95371996-de2d-46e1-a370-47e3ac61aaf0.jpg?v=1782678129"},{"product_id":"resilient-sounds-dual-12-gold-v2-ported-enclosure","title":"Resilient Sounds Dual 12\" Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12\" Ported subwoofer enclosure\u003c\/strong\u003e — tuned and ready to load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.0 cubic feet\u003c\/strong\u003e tuned to 33 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3\/4\" (18mm) Russian Baltic Birch - 13 ply\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e57.38 sq in of port area\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCarbon gray stain with polyurethane topcoat finish\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Resilient Sounds Dual 12\" Ported Subwoofer Enclosure\u003c\/p\u003e\n\u003cp\u003eThis Resilient Sounds Dual 12\" ported enclosure is engineered for the matching Resilient Sounds subwoofer, similar to the \u003cstrong\u003e\u003ca rel=\"noopener\" class=\"decorated-link\" href=\"https:\/\/www.jsultimatesounds.com\/products\/resilient-sounds-dual-15-gold-v2-ported-enclosure\"\u003eDual 15\" Gold V2 Ported Enclosure\u003c\/a\u003e\u003c\/strong\u003e — drop in your sub and start hitting harder with tuned, ready-to-load airspace.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eResilient Sounds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual 12\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePorted Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eNet Volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.0 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eTuning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e33 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003ePort Area\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e57.38 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13.501\" x 4.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eCutout\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11.175\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) Russian Baltic Birch - 13 ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eWiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Resilient Sounds","offers":[{"title":"Default Title","offer_id":66840311529517,"sku":"BHSP-RES-GV2-D12-RD","price":719.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/resilient-sounds-dual-12-gold-v2-ported-enclosure-w_e1ed7b64-fbd9-4803-893b-3de9fc341035.jpg?v=1782678125"},{"product_id":"resilient-sounds-dual-12-gold-ported-enclosure","title":"Resilient Sounds Dual 12\" Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12\" Ported subwoofer enclosure\u003c\/strong\u003e — tuned and ready to load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.0 cubic feet\u003c\/strong\u003e tuned to 33 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3\/4\" (18mm) Russian Baltic Birch - 13 ply\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e57.38 sq in of port area\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCarbon gray stain with polyurethane topcoat finish\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Resilient Sounds Dual 12\" Ported Subwoofer Enclosure\u003c\/p\u003e\n\u003cp\u003eThis Resilient Sounds Dual 12\" ported enclosure is engineered for the matching Resilient Sounds subwoofer, with the \u003ca href=\"https:\/\/www.jsultimatesounds.com\/products\/resilient-sounds-dual-15-gold-ported-enclosure\"\u003e\u003cstrong\u003eDual 15\" Gold Ported Enclosure\u003c\/strong\u003e\u003c\/a\u003e offering a larger bass upgrade then drop in your sub and start hitting harder with tuned, ready-to-load airspace.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eResilient Sounds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual 12\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePorted Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eNet Volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.0 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eTuning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e33 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003ePort Area\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e57.38 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13.501\" x 4.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eCutout\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) Russian Baltic Birch - 13 ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38%;\"\u003e\u003cstrong\u003eWiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Resilient Sounds","offers":[{"title":"Default Title","offer_id":66840312250413,"sku":"BHSP-RES-G-D12-RD","price":719.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/resilient-sounds-dual-12-gold-ported-enclosure-w_27799956-2d94-4ab0-ad53-f23b5dda69b1.jpg?v=1782678120"},{"product_id":"basshead-supply-dual-12-4-0v2-ported-enclosure-1","title":"Basshead Supply 4.0V2 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 4.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 32.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.125\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Basshead Supply 4.0V2 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Basshead Supply 4.0V2 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e32.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.125\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) birch plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e15.0\" tall \/ 23.0\" deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852927340589,"sku":"BHSP-BHS-4.0V2-D12-RD","price":680.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/2ec02ac3-Dual-12-Ported-24mm-Baffle-01-1.png?v=1781192692"},{"product_id":"jl-audio-dual-12-w7-ported-enclosure","title":"JL Audio W7 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 4.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 33.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 57.38 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 10.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the JL Audio W7 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the JL Audio W7 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e57.38 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e13.5\" x 4.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e10.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) birch plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e15.0\" x 34.25\" x 22.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852928028717,"sku":"BHSP-JL-W7-D12-RD","price":755.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/28a390e1-AABE-JL-W7-D12-RD-001-1.png?v=1781192696"},{"product_id":"kicker-dual-12-l7x-ported-enclosure","title":"Kicker L7X 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 4.95 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 76.0 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.0625\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Kicker L7X 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Kicker L7X 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.95 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e76.0 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.0625\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 37.375\" x 23.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852929110061,"sku":"BHSP-KIC-L7X-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/a64f2359-AABE-KI-L7X-D12-HD-01.png?v=1781192739"},{"product_id":"sundown-audio-dual-12-m-series-ported-enclosure","title":"Sundown Audio M Series 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio M Series 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio M Series 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852930158637,"sku":"BHSP-SUN-M-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/0a2744b7-AABE-SA-SAv2-D10-RD-01.png?v=1781192750"},{"product_id":"sundown-audio-dual-12-nsv2-ported-enclosure","title":"Sundown Audio NSV2 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.09\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio NSV2 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio NSV2 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.09\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852930388013,"sku":"BHSP-SUN-NSV2-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/8feba845-AABE-SA-SAv2-D10-RD-01.png?v=1781192751"},{"product_id":"sundown-audio-dual-12-nsv3-ported-enclosure","title":"Sundown Audio NSV3 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio NSV3 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio NSV3 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852930420781,"sku":"BHSP-SUN-NSV3-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/ce17d91d-AABE-SA-SAv2-D10-RD-01.png?v=1781192754"},{"product_id":"sundown-audio-dual-12-uv1-ported-enclosure","title":"Sundown Audio UV1 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 4.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 33.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 58.05 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.01\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio UV1 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio UV1 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e58.05 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e13.5\" x 4.3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.01\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) birch plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e15.0\" x 35.125\" x 22.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852931698733,"sku":"BHSP-SUN-UV1-D12-RD","price":755.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/974b9d69-AABE-SA-SAv2-D10-RD-01.png?v=1781192823"},{"product_id":"sundown-audio-dual-12-nsv6-ported-enclosure","title":"Sundown Audio NSV6 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio NSV6 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio NSV6 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852931534893,"sku":"BHSP-SUN-NSV6-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/c053b606-AABE-SA-SAv2-D10-RD-01.png?v=1781192823"},{"product_id":"sundown-audio-dual-12-xv2-ported-enclosure","title":"Sundown Audio XV2 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio XV2 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio XV2 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852931600429,"sku":"BHSP-SUN-XV2-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/7950e869-AABE-SA-SAv2-D10-RD-01.png?v=1781192823"},{"product_id":"sundown-audio-dual-12-nsv5-ported-enclosure","title":"Sundown Audio NSV5 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio NSV5 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio NSV5 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852931665965,"sku":"BHSP-SUN-NSV5-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/edeb2aca-AABE-SA-SAv2-D10-RD-01.png?v=1781192823"},{"product_id":"sundown-audio-dual-12-xv4-ported-enclosure","title":"Sundown Audio XV4 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio XV4 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio XV4 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852931797037,"sku":"BHSP-SUN-XV4-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/4bdd36f8-AABE-SA-SAv2-D10-RD-01.png?v=1781192823"},{"product_id":"sundown-audio-dual-12-nsv4-ported-enclosure","title":"Sundown Audio NSV4 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio NSV4 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio NSV4 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852931862573,"sku":"BHSP-SUN-NSV4-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/73dc33c6-AABE-SA-SAv2-D10-RD-01.png?v=1781192823"},{"product_id":"sundown-audio-dual-12-zv3-ported-enclosure","title":"Sundown Audio ZV3 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.09\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio ZV3 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio ZV3 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.09\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852931960877,"sku":"BHSP-SUN-ZV3-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/3240ec60-AABE-SA-SAv2-D10-RD-01.png?v=1781192823"},{"product_id":"sundown-audio-dual-12-xv3-ported-enclosure","title":"Sundown Audio XV3 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio XV3 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio XV3 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852931829805,"sku":"BHSP-SUN-XV3-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/7e370891-AABE-SA-SAv2-D10-RD-01.png?v=1781192823"},{"product_id":"sundown-audio-dual-12-zv2-ported-enclosure","title":"Sundown Audio ZV2 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.09\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio ZV2 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio ZV2 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.09\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852932255789,"sku":"BHSP-SUN-ZV2-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/e6558605-AABE-SA-SAv2-D10-RD-01.png?v=1781192823"},{"product_id":"sundown-audio-dual-12-zv5-ported-enclosure","title":"Sundown Audio ZV5 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio ZV5 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio ZV5 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852932616237,"sku":"BHSP-SUN-ZV5-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/17514c53-AABE-SA-SAv2-D10-RD-01.png?v=1781192829"},{"product_id":"sundown-audio-dual-12-zv7-ported-enclosure","title":"Sundown Audio ZV7 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.09\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio ZV7 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio ZV7 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.09\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852932649005,"sku":"BHSP-SUN-ZV7-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/2a4fbdc9-AABE-SA-SAv2-D10-RD-01.png?v=1781192829"},{"product_id":"sundown-audio-dual-12-sav3-ported-enclosure","title":"Sundown Audio SAV3 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 3.5 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 33.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 50.62 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio SAV3 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio SAV3 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e3.5 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e50.62 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e13.5\" x 3.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) birch plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e15.0\" x 33.875\" x 20.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852932812845,"sku":"BHSP-SUN-SAV3-D12-RD","price":724.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/8ec89cfe-AABE-SA-SAv2-D10-RD-01.png?v=1781192830"},{"product_id":"sundown-audio-dual-12-zv6-ported-enclosure","title":"Sundown Audio ZV6 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.09\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio ZV6 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio ZV6 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.09\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852932911149,"sku":"BHSP-SUN-ZV6-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/8a8b32c6-AABE-SA-SAv2-D10-RD-01.png?v=1781192830"},{"product_id":"sundown-audio-dual-12-zv4-ported-enclosure","title":"Sundown Audio ZV4 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio ZV4 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio ZV4 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852933009453,"sku":"BHSP-SUN-ZV4-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/d0f92b14-AABE-SA-SAv2-D10-RD-01.png?v=1781192830"},{"product_id":"american-bass-dual-12-xfl-ported-enclosure","title":"American Bass XFL 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 4.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 33.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 57.38 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the American Bass XFL 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the American Bass XFL 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e57.38 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e13.5\" x 4.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) birch plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e15.0\" x 34.375\" x 22.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852933566509,"sku":"BHSP-AMB-XFL-D12-RD","price":755.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/c59dcbcc-BHSBE-AMB-D12-01-1.png?v=1781192863"},{"product_id":"american-bass-dual-12-godzilla-ported-enclosure","title":"American Bass Godzilla 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 32.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.0 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.125\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the American Bass Godzilla 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the American Bass Godzilla 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e32.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.0 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.125\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 38.625\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852933664813,"sku":"BHSP-AMB-GO-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/cdd6d797-BHSBE-AMB-D12-01-1.png?v=1781192863"},{"product_id":"american-bass-dual-12-xmaxxx-monster-ported-enclosure","title":"American Bass XMAXXX Monster 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 32.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.0 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.125\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the American Bass XMAXXX Monster 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the American Bass XMAXXX Monster 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e32.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.0 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.125\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 38.625\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852933795885,"sku":"BHSP-AMB-XM-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/e29b5634-BHSBE-AMB-D12-01-1.png?v=1781192868"},{"product_id":"sundown-audio-dual-12-sav2-ported-enclosure","title":"Sundown Audio SAV2 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 3.5 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 33.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 50.62 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.01\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio SAV2 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio SAV2 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e3.5 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e50.62 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e13.5\" x 3.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.01\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) birch plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e15.0\" x 33.875\" x 20.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852934025261,"sku":"BHSP-SUN-SAV2-D12-RD","price":724.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/8622342b-AABE-SA-SAv2-D10-RD-01.png?v=1781192868"},{"product_id":"american-bass-dual-12-king-ported-enclosure","title":"American Bass King 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 32.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.0 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.34\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the American Bass King 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the American Bass King 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e32.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.0 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 38.625\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852934090797,"sku":"BHSP-AMB-KI-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/53e1b62e-BHSBE-AMB-D12-01-1.png?v=1781192868"},{"product_id":"dc-audio-dual-12-sealed-enclosure","title":"DC Audio 12\" Dual Sealed Subwoofer Enclosure","description":"\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply sealed enclosure for the DC Audio 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the DC Audio 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852934320173,"sku":"BHSP-DC-NEO3.5-D12-HD","price":839.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/48b65c92-BHSPE-DC-D12-01-8.png?v=1781192869"},{"product_id":"dc-audio-dual-12-sealed-enclosure-1","title":"DC Audio 12\" Dual Sealed Subwoofer Enclosure","description":"\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply sealed enclosure for the DC Audio 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the DC Audio 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852934549549,"sku":"BHSP-DC-LVL5-D12-HD","price":839.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/7845221f-BHSPE-DC-D12-01-8.png?v=1781192870"},{"product_id":"dc-audio-dual-12-level-3-ported-enclosure","title":"DC Audio Level 3 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 3.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 33.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 43.2 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.0\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the DC Audio Level 3 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the DC Audio Level 3 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e3.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e43.2 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e13.5\" x 3.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) birch plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e15.0\" x 33.625\" x 18.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852935008301,"sku":"BHSP-DC-LVL3-D12-RD","price":661.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/933df154-BHSPE-DC-D12-01-8.png?v=1781192875"},{"product_id":"dc-audio-dual-12-sealed-enclosure-2","title":"DC Audio 12\" Dual Sealed Subwoofer Enclosure","description":"\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply sealed enclosure for the DC Audio 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the DC Audio 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852935073837,"sku":"BHSP-DC-XLS-D12-HD","price":839.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/2c73ee92-BHSPE-DC-D12-01-8.png?v=1781192875"},{"product_id":"dc-audio-dual-12-xl-elite-ported-enclosure","title":"DC Audio XL Elite 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 4.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 32.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 58.12 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.15\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the DC Audio XL Elite 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the DC Audio XL Elite 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e32.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e58.12 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e15.0\" x 3.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.15\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e17.0\" x 36.875\" x 20.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852935467053,"sku":"BHSP-DC-XLE-D12-HD","price":839.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/f672cd66-BHSPE-DC-D12-01-8.png?v=1781192880"},{"product_id":"dc-audio-dual-12-level-4-ported-enclosure","title":"DC Audio Level 4 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 3.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 33.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 43.2 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.0\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the DC Audio Level 4 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the DC Audio Level 4 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e3.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e43.2 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e13.5\" x 3.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) birch plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e15.0\" x 33.625\" x 18.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852935565357,"sku":"BHSP-DC-LVL4-D12-RD","price":661.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/276bdeac-BHSPE-DC-D12-01-8.png?v=1781192880"},{"product_id":"trinity-audio-dual-12-h-series-ported-enclosure","title":"Trinity Audio Solutions H Series 12\" Dual Ported Subwoofer Enclosure — 4.8 cubic feet @ 32 Hz","description":"\u003cp\u003eEngineered specifically for the Trinity Audio Solutions H Series 12\" subwoofer, this dual ported enclosure delivers optimal airspace and 32 Hz tuning for deep, controlled bass response. Each box is precision-built for a factory-tight fit and a clean, finished look.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.8 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e61.6 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Size\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 3.85\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout\u003c\/td\u003e\n\u003ctd\u003e11.22\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) Russian Baltic Birch — 17 ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBaffle\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) front baffle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracing\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) center baffle brace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Rating\u003c\/td\u003e\n\u003ctd\u003eHigh power systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 36.0\" x 22.125\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHandcrafted by hand in the USA\u003c\/li\u003e\n\u003cli\u003eZero visible screw holes on the exterior for a clean, show-quality look\u003c\/li\u003e\n\u003cli\u003eFully glued with Titebond III for airtight integrity and long-term durability\u003c\/li\u003e\n\u003cli\u003eArrives ready to install — just wire up your subwoofer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Built to order. Ships in 2-3 weeks. All sales final.\u003c\/p\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852937465901,"sku":"BHSP-TRI-H-D12-HD","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/BHSP-TRI-D10-RD-01-4.png?v=1783721893"},{"product_id":"sundown-audio-dual-12-sac-ported-enclosure","title":"Sundown Audio SAC 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 3.5 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 33.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 50.62 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.125\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio SAC 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio SAC 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e3.5 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e50.62 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e13.5\" x 3.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.125\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) birch plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e15.0\" x 33.875\" x 20.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852937564205,"sku":"BHSP-SUN-SAC-D12-RD","price":724.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/ff20b6ba-AABE-SA-SAv2-D10-RD-01.png?v=1781192929"},{"product_id":"trinity-audio-dual-12-b-series-ported-enclosure","title":"Trinity Audio Solutions B Series Dual 12\" Ported Enclosure — 4.8 cu ft @ 32Hz","description":"\u003cp\u003eEngineered specifically for the Trinity Audio B Series 12\" subwoofer, this dual 12\" ported enclosure delivers the airspace and 32 Hz tuning needed for deep, controlled bass. Handcrafted by hand in the USA from Russian Baltic birch, it arrives ready to install — just wire up your subwoofers and enjoy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.8 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e67.06 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Size\u003c\/td\u003e\n\u003ctd\u003e14.499\" x 4.625\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout\u003c\/td\u003e\n\u003ctd\u003e11.22\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) Russian Baltic birch, 13-ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBaffle\u003c\/td\u003e\n\u003ctd\u003eSolid 1\" (24mm) front baffle, 17-ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracing\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) center baffle brace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Rating\u003c\/td\u003e\n\u003ctd\u003eUp to 3,500W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 35.875\" x 23.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHandcrafted in the USA with zero visible exterior screw holes\u003c\/li\u003e\n\u003cli\u003eFully glued with Titebond III for airtight integrity and durability\u003c\/li\u003e\n\u003cli\u003eShips ready to install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuilt to order. Ships in 2–3 weeks. All sales final.\u003c\/p\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852937760813,"sku":"BHSP-TRI-B-D12-RD","price":850.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/BHSP-TRI-D10-RD-01-2.png?v=1783721849"},{"product_id":"resilient-sounds-dual-12-gold-ported-enclosure-1","title":"Resilient Sounds Gold 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 4.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 33.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 57.38 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Resilient Sounds Gold 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Resilient Sounds Gold 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e57.38 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e13.5\" x 4.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) birch plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e15.0\" x 34.875\" x 22.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852938481709,"sku":"BHSP-RES-G-D12-RD","price":755.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/22e2e663-Adire-RS-PT-D12-HD-01.png?v=1781192935"},{"product_id":"sundown-audio-dual-12-uv2-ported-enclosure","title":"Sundown Audio UV2 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 4.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 33.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 58.05 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio UV2 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio UV2 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e58.05 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e13.5\" x 4.3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) birch plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e15.0\" x 35.125\" x 22.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852938743853,"sku":"BHSP-SUN-UV2-D12-RD","price":755.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/5ee46b61-AABE-SA-SAv2-D10-RD-01.png?v=1781192938"},{"product_id":"trinity-audio-dual-12-m-series-ported-enclosure","title":"Trinity Audio Solutions M Series 12\" Dual Ported Subwoofer Enclosure — 4.8 cubic feet @ 32 Hz","description":"\u003cp\u003eEngineered specifically for the Trinity Audio Solutions M Series 12\" subwoofer, this dual ported enclosure delivers optimal airspace and 32 Hz tuning for deep, controlled bass response. Each box is precision-built for a factory-tight fit and a clean, finished look.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.8 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e67.06 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Size\u003c\/td\u003e\n\u003ctd\u003e14.499\" x 4.625\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout\u003c\/td\u003e\n\u003ctd\u003e11.22\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) Russian Baltic Birch — 13 ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBaffle\u003c\/td\u003e\n\u003ctd\u003eSolid 1\" (24mm) front baffle — 17 ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracing\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) center baffle brace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Rating\u003c\/td\u003e\n\u003ctd\u003eUp to 3500W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 35.875\" x 23.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHandcrafted by hand in the USA\u003c\/li\u003e\n\u003cli\u003eZero visible screw holes on the exterior for a clean, show-quality look\u003c\/li\u003e\n\u003cli\u003eFully glued with Titebond III for airtight integrity and long-term durability\u003c\/li\u003e\n\u003cli\u003eArrives ready to install — just wire up your subwoofer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e Built to order. Ships in 2-3 weeks. All sales final.\u003c\/p\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852938907693,"sku":"BHSP-TRI-M-D12-RD","price":850.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/BHSP-TRI-D10-RD-01-7.png?v=1783721938"},{"product_id":"resilient-sounds-dual-12-platinum-ported-enclosure-1","title":"Resilient Sounds Platinum 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 4.5 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 32.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 65.0 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Resilient Sounds Platinum 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Resilient Sounds Platinum 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.5 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e32.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e65.0 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.0625\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 35.125\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852939923501,"sku":"BHSP-RES-PT-D12-HD","price":892.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/ceec386b-Adire-RS-PT-D12-HD-01.png?v=1781192990"},{"product_id":"resilient-sounds-dual-12-platinum-v2-ported-enclosure-1","title":"Resilient Sounds Platinum v2 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 4.5 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 32.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 65.0 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.175\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 1\" (24mm) plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Resilient Sounds Platinum v2 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Resilient Sounds Platinum v2 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.5 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e32.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e65.0 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.0625\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.175\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 35.5\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852940218413,"sku":"BHSP-RES-PTV2-D12-HD","price":892.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/966dd7b0-Adire-RS-PT-D12-HD-01.png?v=1781192990"},{"product_id":"resilient-sounds-dual-12-gold-v2-ported-enclosure-1","title":"Resilient Sounds Gold v2 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 4.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 33.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 57.38 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.175\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - 3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Resilient Sounds Gold v2 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Resilient Sounds Gold v2 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\n\u003cli\u003eGray stained finish\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e57.38 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e13.5\" x 4.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.175\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) birch plywood construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGray stained finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e15.0\" x 34.875\" x 22.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852940251181,"sku":"BHSP-RES-GV2-D12-RD","price":755.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/40ac5bba-Adire-RS-PT-D12-HD-01.png?v=1781192990"},{"product_id":"sundown-audio-dual-12-sac-mdf-ported-enclosure","title":"Sundown Audio SAC MDF 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 3.5 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 33.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 50.62 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.125\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - Dense, uniform, void-free triple refined MDF panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio SAC MDF 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio SAC MDF 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDense, uniform, void-free triple refined MDF panel\u003c\/li\u003e\n\u003cli\u003eShips bare \/ unfinished - sanded and ready to finish your way\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e3.5 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e50.62 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e13.5\" x 3.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.125\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDense, uniform, void-free triple refined MDF panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eShips bare \/ unfinished - sanded and ready to finish your way\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e15.0\" x 33.875\" x 20.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852943331373,"sku":"BHSF-SUN-SAC-D12-RD-MDF","price":434.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/cba490da-BHSF-SUN-M-D10-HD-MDF-image-1.jpg?v=1781193053"},{"product_id":"sundown-audio-dual-12-nsv3-mdf-ported-enclosure","title":"Sundown Audio NSV3 MDF 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - Dense, uniform, void-free triple refined MDF panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio NSV3 MDF 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio NSV3 MDF 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDense, uniform, void-free triple refined MDF panel\u003c\/li\u003e\n\u003cli\u003eShips bare \/ unfinished - sanded and ready to finish your way\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDense, uniform, void-free triple refined MDF panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eShips bare \/ unfinished - sanded and ready to finish your way\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852943462445,"sku":"BHSF-SUN-NSV3-D12-HD-MDF","price":566.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/bfa02f02-BHSF-SUN-M-D10-HD-MDF-image-1.jpg?v=1781193055"},{"product_id":"sundown-audio-dual-12-sav3-mdf-ported-enclosure","title":"Sundown Audio SAV3 MDF 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 3.5 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 33.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 50.62 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - Dense, uniform, void-free triple refined MDF panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio SAV3 MDF 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio SAV3 MDF 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDense, uniform, void-free triple refined MDF panel\u003c\/li\u003e\n\u003cli\u003eShips bare \/ unfinished - sanded and ready to finish your way\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e3.5 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e50.62 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e13.5\" x 3.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDense, uniform, void-free triple refined MDF panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eShips bare \/ unfinished - sanded and ready to finish your way\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e15.0\" x 33.875\" x 20.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852943560749,"sku":"BHSF-SUN-SAV3-D12-RD-MDF","price":434.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/1cf18af9-BHSF-SUN-M-D10-HD-MDF-image-1.jpg?v=1781193056"},{"product_id":"sundown-audio-dual-12-nsv6-mdf-ported-enclosure","title":"Sundown Audio NSV6 MDF 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - Dense, uniform, void-free triple refined MDF panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio NSV6 MDF 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio NSV6 MDF 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDense, uniform, void-free triple refined MDF panel\u003c\/li\u003e\n\u003cli\u003eShips bare \/ unfinished - sanded and ready to finish your way\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDense, uniform, void-free triple refined MDF panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eShips bare \/ unfinished - sanded and ready to finish your way\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852943757357,"sku":"BHSF-SUN-NSV6-D12-HD-MDF","price":566.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/2c54d9db-BHSF-SUN-M-D10-HD-MDF-image-1.jpg?v=1781193058"},{"product_id":"sundown-audio-dual-12-nsv5-mdf-ported-enclosure","title":"Sundown Audio NSV5 MDF 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - Dense, uniform, void-free triple refined MDF panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio NSV5 MDF 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio NSV5 MDF 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDense, uniform, void-free triple refined MDF panel\u003c\/li\u003e\n\u003cli\u003eShips bare \/ unfinished - sanded and ready to finish your way\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDense, uniform, void-free triple refined MDF panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eShips bare \/ unfinished - sanded and ready to finish your way\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852944183341,"sku":"BHSF-SUN-NSV5-D12-HD-MDF","price":566.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/b3fa07c1-BHSF-SUN-M-D10-HD-MDF-image-1.jpg?v=1781193061"},{"product_id":"sundown-audio-dual-12-nsv4-mdf-ported-enclosure","title":"Sundown Audio NSV4 MDF 12\" Dual Ported Subwoofer Enclosure","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Volume\u003c\/strong\u003e - 5.0 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning\u003c\/strong\u003e - 31.0 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Area\u003c\/strong\u003e - 72.8 sq in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub Cutout\u003c\/strong\u003e - 11.19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e - Dense, uniform, void-free triple refined MDF panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis Listing Includes:\u003c\/strong\u003e (1) Basshead Supply ported enclosure for the Sundown Audio NSV4 MDF 12\" subwoofer\u003c\/p\u003e\u003cp\u003eThis enclosure is custom built specifically for the Sundown Audio NSV4 MDF 12\" subwoofer. Basshead Supply's Performance Series enclosures are subwoofer-specific boxes engineered for strong, clean output, built with a refined assembly process that leaves no visible screw holes. Every box is glued with Titebond III and internally braced, then pre-wired with a recessed satin-nickel binding post and OFC 10-gauge wire - built by hand in the USA. Custom built to order by Basshead Supply and shipped directly from them, about 2 to 3 weeks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDense, uniform, void-free triple refined MDF panel\u003c\/li\u003e\n\u003cli\u003eShips bare \/ unfinished - sanded and ready to finish your way\u003c\/li\u003e\n\u003cli\u003eRefined assembly - no visible screw holes\u003c\/li\u003e\n\u003cli\u003eGlued with Titebond III and internally braced\u003c\/li\u003e\n\u003cli\u003ePre-wired recessed satin-nickel binding post with OFC 10-gauge wire\u003c\/li\u003e\n\u003cli\u003eBuilt by hand in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e5.0 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e31.0 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e72.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003ePort Dimensions\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 4.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eSub Cutout\u003c\/td\u003e\n\u003ctd\u003e11.19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDense, uniform, void-free triple refined MDF panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eShips bare \/ unfinished - sanded and ready to finish your way\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width:35%;\"\u003eDimensions (HxWxD)\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 39.375\" x 21.875\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":66852944216109,"sku":"BHSF-SUN-NSV4-D12-HD-MDF","price":566.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/8096\/4909\/files\/855286c4-BHSF-SUN-M-D10-HD-MDF-image-1.jpg?v=1781193061"}],"url":"https:\/\/www.jsultimatesounds.com\/collections\/subwoofer-enclosures-12-inch-dual.oembed","provider":"JS Ultimate Sounds","version":"1.0","type":"link"}